OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG PERSONAL COMPONENT SYSTEM/STEREO CASSETTE TAPE DECK DS-801 OPEN/CLOSE ON/STANDBY DS-801 Stereo Cassette Tape Deck Stereo Cassetten-Recorder
Introduction ENGLISH UNPACKING AND FOR U.S.A Congratulations on Your Purchase! Your new high fidelity Cassette Tape Deck is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation. Please unpack your Cassette Tape Deck carefully. We recommend that you save the carton and packing material.
FOR U.S.A AND CANADA ........................120 V FOR EUROPE AND AUSTRALIA .......... 230V/240V FOR YOUR SAFETY FOR YOUR SAFETY Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Units shipped to Australia are designed for operation on 240 V AC only. To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring.
ENGLISH CONTENTS Introduction UNPACKING AND INSTALLATION ...................................................................................................... 2 READ THIS BEFORE OPERATING YOUR UNIT .................................................................................. 3 Rear Panel Connections ............................................................................................................................... 5 Front Panel & System Remote Controls ....................................
• Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords. • Refer to the connecting diagram in the operating instructions of Sherwood system receiver RX-801R. PB LINE CAUTION : TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER-SERVICING TO QUALIFIED SERVICE PERSONNEL.
ENGLISH Front Panel & System Remote Controls Front Panel Controls PERSONAL COMPONENT SYSTEM/STEREO CASSETTE TAPE DECK DS-801 OPEN/CLOSE ON/STANDBY System Remote Controls POWER SLEEP AUX 1 2 3 4 5 6 7 8 9 MD TUNER CD TAPE 0 DOLBY C.RESET CD SYNC. REV.
REWIND( • Press this button to turn the power on and press again to enter the standby mode. • In standby mode, this unit is not disconnected from the AC mains and a small amount of current is retained for operation readiness. • For system operation, connect this unit to Sherwood system receiver RX-801R as illustrated in the connecting diagram in the operating instructions of RX-801R, then this unit is turned on or off depending on the power operation on RX-801R.
Before Operation ENGLISH NOTES ON CASSETTE TAPE • Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. PRINCIPLE OF DOLBY B NR SYSTEM The Dolby NR system functions so that it automatically increases recording levels of medium and high frequencies when the recording signal level is lower than the specified level(encoding), and automatically reduces the output level to the normal level during playback(decoding).
Operations ENGLISH • To use the system remote control unit of Sherwood system receiver RX-801R, first connect the SYSTEM CONNECTOR jack of this unit to that of RX-801R.(Refer to the operating instructions of the RX-801R.) PLAYING BACK A TAPE Turn the power on. 1 ON/STANDBY • Each time the POWER(ON/STANDBY) button is pressed, this unit is turned on or off. Load a tape. 2 3 • According to the type of the tape loaded, the corresponding type(normal, chrome) is detected by the auto tape selector.
ENGLISH To stop playback. 6 7 • In case of forward playback(“ POWER SLEEP AUX 1 2 4 5 7 8 To rapidly advance or rewind the tape, press the corresponding button in the stop mode. 3 ”). MD 6 TUNER 9 TAPE CD 0 DOLBY C.RESET CD SYNC. EDIT TIME REPEAT TUNING POWER SLEEP REV.MODE To rewind RANDOM EON AUTO/MONO RDS TUNE MODE To advance AUX 1 2 3 4 5 6 7 8 9 MD TUNER PROGRAM MEMO ENTER CD TAPE 0 VOL DOLBY C.RESET CD SYNC. REV.
Load a tape to be recorded. Note • When there is a erase-protection tab, to record on a single side, you should load a tape correctly or select the corresponding tape direction depending on the tape direction display( : Playback/recording of the back side, :Playback/recoding of the front side).
ENGLISH In the recording pause mode, press the corresponding PLAY button to start recording. 6 POWER SLEEP AUX 1 2 3 4 5 6 7 8 9 TAPE MD TUNER TAPE CD 0 DOLBY C.RESET CD SYNC. EDIT TIME REPEAT REV.MODE RANDOM EON AUTO/MONO TUNING RDS TUNE MODE PROGRAM MEMO ENTER VOL or • “PLAY” lights up and recording starts. • If recording is performed, start play on the desired recording source.
• When the SYSTEM CONNECTOR jack of this unit is connected to that of Sherwood system CD player CD-801, the CD synchro recording can be performed. 1 Do the steps 1~3 in “RECORDING” procedure. • Because CD synchro recording will start from the front side, be sure the erase-protection tab of the front side. • Only when the both of the erase-protection tabs on the tape are in place, CD synchro recording can be performed on both sides. Select the CD as recording source.
Troubleshooting Guide ENGLISH If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. PROBLEM POSSIBLE CAUSE REMEDY No power • The AC input cord is disconnected. • The POWER(ON/STANDBY) button is not pressed completely. • Connect the cord securely. • Press the POWER(ON/STANDBY) button to ON. No sound • Unrecorded tape is loaded. • Incorrect connections.
Specifications Type ........................................................................................ Stereo full logic cassette deck with Dolby B NR system Recording system ........................................................................................ AC bias system (bias frequency : 105 kHz) Erasing system ................................................................................................................................................ AC system Tape speed ...................
5707-21050-008-0
