Stereo Receiver User Manual

5
System Connections
• Do not plug the AC input cord into the wall AC outlet until all connections are completed.
• Be sure to observe the color coding when connecting audio, video and speaker cords.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
MODEL NO. R-771
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(
1
)
This device may not cause harmful interference, and
(
2
)
This device must accept any interference received,
including interference that may cause undesired operation.
120V~60Hz
SWITCHED
TOTAL 120W(1A) MAX.
AC INPUT
120V~60Hz
3.7A
1. CONNECTING ANTENNAs
• Change the position of the FM indoor antenna until you
get the best reception of your favorite FM stations.
• Place the AM loop antenna as far as possible
from the receiver, TV set, speaker cords and the
AC input cord and set it to a direction for the
best reception.
• If the reception is poor with the AM loop anten-
na, an AM outdoor antenna can be used in
place of the AM loop antenna.
• A 75Ω outdoor FM antenna may be used to further
improve the reception. Disconnect the indoor
antenna before replacing it with the outdoor one.
ENGLISH