O P E R A T I N G I N S T R U C T I O N S MASTER VOLUME AUDIO/VIDEO RECEIVER R-325 45 INPUT SELECTOR 50 55 40 60 65 35 BAND STANDBY ST TUNED AUTO VCR12 POWERT TAPE M dB kHz MHz MULTI ROOM REMOTE SENSOR Pro Logic 3 Stereo THEATER HALL 30 PRESET MEM 70 25 75 FM MODE ms SLEEP 20 MEMORY SLEEP 80 15 85 90 10 1 2 3 4 5 6 7 8 9 0 TUNING DIRECT 95 5 0 - REAR LEVEL + OFF PHONES DOLBY PRO-LOGIC DOLBY 3 STEREO THEATER HALL - CENTER LEVEL + CENTER MODE 100 TAPE MONI
ENGLISH INTRODUCTION UNPACKING AND INSTALLATION READ THIS BEFORE OPERATING YOUR UNIT Congratulations on Your Purchase! FOR U.S.A. AND CANADA .......................................... 120 V Your new high fidelity Receiver is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation. Please unpack your unit carefully.
INSTALLATION Please make the following connections (where applicable). Notes! – SWITCH OFF THE RECEIVER BEFORE MAKING ANY CONNECTIONS. – Do not connect the receiver to the AC outlet when making connections. – Be sure to connect the white plugs to the L (left) and the red plugs to the R (right) jacks when making connections. R-325 Device to be connected e.g. cassette deck.
ENGLISH INSTALLATION SPEAKER POSITIONING 5.VIDEO IN/OUT – MONITOR OUT – output jack for connecting to the video input of a TV set. The TV set must then be switched to that input. – VCR 1 PLAY/REC – play(input) and rec(output) jacks for connecting the video output and input of a VCR. 6.LOW LEVEL PRE-OUT – SUBWOOFER OUT – output jacks for driving SUBWOOFER. Connect these jacks to SUBWOOFER input jacks of separate amplifier or a powered SUBWOOFER.
FUNCTION OVERVIEW 2 5 6 8 9 11 12 13 10 14 22 ENGLISH 1 MASTER VOLUME AUDIO/VIDEO RECEIVER R-325 45 INPUT SELECTOR 50 55 40 60 65 35 STANDBY ST TUNED AUTO VCR12 TAPE TAP M POWERT dB kHz MHz MULTI ROOM REMOTE SENSOR Pro Logic 3 Stereo THEATER HALL BAND PRESET 30 70 MEM 25 75 FM MODE ms SLEEP 20 MEMORY SLEEP 80 15 85 90 10 1 2 3 5 4 6 7 8 9 0 TUNING DIRECT 95 5 0 - REAR LEVEL + OFF PHONES DOLBY PRO-LOGIC DOLBY 3 STEREO THEATER HALL BASS SPEAKERS A
FUNCTION OVERVIEW ENGLISH DISPLAY ST TUNED AUTO VCR12 TAPE M dB kHz MHz Pro Logic 3 Stereo THEATER HALL PRESET MEM ms SLEEP POWER 3 SLEEP P. SCAN 1 2 ST Lights up when a FM stereo transmission is received. 1 2 3 4 5 6 7 8 9 0 4 5 6 7 10 TUNED Lights up when a FM or AM transmission is received. 8 9 DISC CD CD TUNER CENTER LEVEL 11 13 14 15 16 17 18 19 20 21 22 26 27 30 31 MASTER VOLUME 33 REPEAT A< >B INTRO SCAN TAPE1 MON. 12 AUTO Lights up when operating auto tuning.
REMOTE FUNCTION OVERVIEW 11.POWER – for power control of this receiver or system. (as described in amplifier chapter titled "POWER ON/STANDBY") 12.SLEEP – for setting a time period after which the system will automatically be switched to standby. 14.SYSTEM DISPLAY – for dimming displays of Sherwood components connected by DIGI LINK II or III. COMPACT DISC PLAYER 15.0-9 DIGITS – for track selection, press desired button among 10 buttons on the remote control and for disk selection, select disc No.
AMPLIFIER ENGLISH POWER ON/STANDBY press the POWER button on the receiver or the remote control to turn the power on. – The receiver enters the operating mode, the respective indicators light up and the standby indicator lights off. To switch the receiver off, press the POWER button again. – The receiver enters the standby mode and the standby indicator lights up.
AMPLIFIER DOLBY 3 STEREO combines the front and rear signals so that you can enjoy a regenerated sound field which has comparatively more lively presence and a more expansive feeling from the three front channels (front left, front right and center speakers) than that of ordinary stereo regeneration. THEATER : Use this when watching movie sources that have a stereo soundtrack to enjoy the effect of being in a movie theater. HALL : Hall mode works best for recorded concerts and other music programs.
TUNER Select the waveband by pressing the BAND button. Tune to a radio station or select a preset number. The correct procedure is described in the following chapters. – While tuning, the audio signal will be muted to eliminate interfering background noises. Once a station is found, the audio signal will be set to normal volume again. – When ST appears on the display, you are receiving an FM stereo transmission. A disturbing noise, due to a weak FM stereo signal, can be suppressed by pressing FM MODE.
ADDITIONAL INFORMATION The sleep mode allows the system to continue to operate for a specified period of time before automatically shutting off. Press the SLEEP button. – The display shows the indication SLEEP 10. – This means that the system will be switched to standby after 10 minutes. – Each time the button is pressed, the setting is changed as below.
ENGLISH TROUBLESHOOTING If a fault occurs, run through the points listed below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you repair the receiver yourself as this will invalidate the guarantee! PROBLEM STATIONS CANNOT BE RECEIVED – POSSIBLE CAUSE REMEDY – No antenna connected. Connect an antenna.
O P E R A T I N G I N S T R U C T I O N S R-325 AUDIO/VIDEO RECEIVER 9007018702