cover_774:cover_7503A 2009-11-13 오후 2:34 페이지 1 R-774
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 2 ENGLISH IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 3 Introduction This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 4 ENGLISH contents • IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 5 • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 6 ENGLISH 2. CONNECTING VIDEO COMPONENTS • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2/VIDEO 3 can also be connected to an additional video component such as a cable TV tuner or satellite system. • Connect the jacks of VIDEO 3 to the video component in the same way.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 7 Continued • You can connect the source component (BD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. • The HDMI connection can carry uncompressed digital video signals and digital audio signals. • The HDMI video stream signals (video signals) are theoretically compatible with DVI-D. When connecting to a TV monitor, etc.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 8 FRONT SURROUND SUBWOOFER SUR.BACK • Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs. • In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit. (For details, refer to the operating instructions of the component to be connected.) CENTER EXTERNAL IN 5.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 9 • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to "Speaker placement" on page 10.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 10 Continued 1. Strip away approx. 10 mm (3/8 inch) of wire insulation, then twist the wire ends tight. 2. Lossen by turning the speaker terminal counterclockwise. 3. Insert the bare part of the wire. 4. Tighten by turning it clockwise. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 11 • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the ROOM 2 speaker terminals to the speakers.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 12 • Connect this jack to the DIGI LINK-i jack of Sherwood iPod dock that allows you to control the iPod with the unit's remote control. DIGI LINK-i 11. CONNECTING SIRIUS CONNECTOR (only for North America) • Connect the SIRIUS connector to the Sirius Connect Home Tuner kit (sold separately). • Position the Home Tuner antenna near a south-facing window to receive the best signal.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 13 12. CONNECTING RF REMOTE ANTENNA ■Note: • If the walls are too thick or the distance exceeds the operation range, you cannot control this receiver with the universal remote control. In such a case, connect the multi-room system kit to this receiver and set the transmission signal mode to "IR" (Infrared). (For details, refer to "Changing the transmission signal" on page 28.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 14 ENGLISH 14. CONNECTING PC FOR UPGRADES • This receiver incorporates RS-232C terminal that may be used in the future to update the operating software so that it will be able to support new digital audio formats, external control by using an external device and the like. • Connect RS-232C terminal to your PC.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 15 ENGLISH Front Panel Controls 1. POWER switch 2. POWER ON/STANDBY button 3. STANDBY indicator 4. INPUT SELECTOR knob 5. BAND button 6. EXTERNAL IN button 7. SURROUND MODE/CONTROL DOWN(▼) button 8. STEREO/CONTROL UP(▲) button 9. MASTER VOLUME CONTROL knob 10. MULTI CONTROL knob(◀/▶) 11. HEADPHONE jack 12. SPEAKER button 13. ROOM 2 button 14. CHANNEL LEVEL button 15. SETUP button 16. MEMORY/ENTER button 17. TUNING UP(+)/DOWN(-) buttons 18.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 16 ENGLISH ■ SETUP MIC JACk • To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When selecting the Auto Setup" on page 56.) ■Notes: • Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 17 This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as iPod docks, CD players, tape decks, TVs, BD/DVD players, satellite receivers, cable boxes, etc. • To operate 7 components other than this receiver, you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 20.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 18 ■FUNCTION TABLE of the NUMBERED BUTTONS.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 19 1. Enter the setup code for each ReMote contRoL oPeRAtIon RAnGe ■In case that this remote control emits the infrared beams • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. component other than this receiver. For details, refer to "Entering a setup code" on page 20. 2. Turn on the component you want to operate. 3.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 20 ENGLISH UsInG FUnctIons oF ReMote contRoL • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 21 6. Operate the component using the corresponding 3. While "PRESET" is displayed, search a setup function buttons. code, aiming the remote control at the remote sensor on the component. ENGLISH • If any of buttons fails to operate as they should, start from the step 1 again to enter the correct setup code. ■Note : • Manufacturers may use different setup codes for the same product category.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 22 4. While "SEL" is flickering, on this remote control, ENGLISH Programming the commands from other remote controls (LEARNING mode) press the button corresponding to the function to be learned. • If the setup codes are not available for your component or you want to program a missing or special function into one button of a device, the learning function enables this remote control to learn the commands from other remote controls.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 23 Erasing all the commands programmed under a device mode 1. Perform the steps 3 and 4 in "Entering a setup 1. Perform the steps 3 and 4 in "Entering a setup code" procedure on page 20 to select the deleting mode ("DELETE"). code" procedure on page 20 to select the deleting mode ("DELETE"). • Then "BTTN" is displayed on the LCD screen for several seconds. • Then "BTTN" is displayed on the LCD screen for several seconds. 2.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 24 ENGLISH Programming a macro function • The macro function enables you to program a series of button operations(up to 15) on this remote control into a single button. • You can store up to three separate macro command sequences into "M1", "M2" and "M3" buttons. 3. While "SEL" is flickering, press the operation buttons you want to program in order. Example: When playing a BD on the BD player connected to VIDEO 2 jacks of this receiver. ①.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 25 Operating a macro function • Aim the remote control at the REMOTE SENSORs of the components to be controlled and press the MACRO button you want. Example : When pressing "M1" button. UP(▲)/DOWN(▼) buttons to select the desired punch-through mode, then press the ENTER button. ■Notes: • The codes programmed into a MACRO button will be transmitted at an interval of 0.5 seconds. However, some components may not be able to complete one operation in 0.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 26 Continued Operating a punch-through function ENGLISH 3. While the device is displayed, press the • While this remote control is set to control a master device, aim the remote control at the REMOTE SENSOR of the punch-through device and press the desired button of the programmed punch-through controls. Example: When pressing "PLAY (▶)" button. CURSOR UP(▲)/DOWN(▼) buttons to select the desired punch-through device, then press the ENTER button.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 27 Continued 3. While the device is displayed, press the 2. While "VOL" is displayed, press the CURSOR UP(▲)/DOWN(▼) buttons to select the all punch-through deleting mode ("DELETE"). ENGLISH CURSOR UP(▲)/DOWN(▼) buttons to select the one punch-through deleting mode ("DELETE"), then press the ENTER button.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 28 3. While "RF" (or "IR") is displayed, press the ENGLISH Changing the transmission signal CURSOR UP(▲)/DOWN(▼) buttons to select the desired transmission signal, then press the ENTER button. • This remote control can emit not only the infrared beams which the conventional remote control uses but also the RF(Radio Frequency) beams which are stronger than those.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 29 ROOM 2 Remote Controls REMOTE CONTROL OPERATION RANGE When one of buttons other than VIDEO 5~6 and PHONO is pressed, the corresponding input source is selected. • Aim the ROOM 2 remote control at the IR receiver installed in other room.(For details, refer to "CONNECTING MULTI-ROOM SYSTEM KIT" on page 13.) Each time this button is pressed, the ROOM 2 function is activated or canceled.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 30 ENGLISH Operations ■Notes: • Before operating this receiver with the supplied remote control, refer to "Universal Remote Controls" on page 17 for details about operation. • Before operating this receiver, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to "OSD Menu Settings" on page 49.) LISTENING TO A PROGRAM SOURCE 3. Select the desired input source.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 31 When CD, F.AUx, VIDEO 1~ 3, ExT.IN is selected as an input source • When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 34. • If the Audio Mode is set to the mode other than "Digital" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTING THE INPUT SETUP" on page 64.) 7. Adjust the (overall) volume. 4.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 32 sURRoUnD soUnD ENGLISH • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. Surround modes ■DTS Digital Surround ■Dolby Digital DTS Digital Surround(also called simply DTS) supports up to 5.1 discrete channels and uses less compression for high fidelity reproduction. Use it with DVDs and CDs bearing the DTS logo.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 33 ■Panorama This mode provides a dynamic and broad sound space to heighten the overall impact of the sound track. ■Theater This mode provides the effect of being in a movie theater when watching a play. ■Classic This mode provides the acoustic effects of a large concert hall for classical music. ■Hall This mode provides the ambience of a concert hall for classical music sources such as orchestral, chamber music or an instrumental solo.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 34 ENGLISH ENJOYING SURROUND SOUND ■Notes: • Before surround playback, first perform the speaker setup procedure, etc. on the OSD menu for optimum performance. (For details, refer to "SETTING THE SPEAKER / ROOM EQ SETUP" on page 56.) • When playing digital signals from the Dolby Digital program source or selecting the surround mode such as Dolby Pro Logic II /Dolby Pro Logic IIx Music mode, you can adjust their parameters for optimum surround effect.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 35 Continued • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the MULTI CONTROL knob on the front panel or the SURROUND MODE UP/DOWN (〉 /〈) buttons on the remote control. ■2CH downmix mode • This mode allows the multi-channel signals encoded in DTS or Dolby Digital format, etc.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 36 ENGLISH Adjusting the current channel level • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("CAL"), not into preset memory("MOVIE" for movie source, "MUSIC" for music source). 1. Press the CHANNEL LEVEL button.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 37 Memorizing the adjusted channel levels 1. After performing the steps 1~4 in "Adjusting the current channel level" procedure on page 36, press the (MEMORY/)ENTER button. • The "MOVIE" flickers for several seconds. 2. Select the desired one of MOVIE and MUSIC. • If the preset memory disappears, perform the above step 1 again. 3. Confirm your selection. • The adjusted channel levels have now been memorized into the selected memory.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 38 LISTENING TO RADIO BROADCASTS Manual tuning ENGLISH Auto tuning 1. Select the desired band. • Manual tuning is useful when you already know the frequency of the desired station. • After selecting the desired band, press the TUNING UP(+)/DOWN(-) buttons repeatedly until the right frequency has been reached. Auto presetting • Auto presetting function automatically searches for FM stations only and store them in the memory.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 39 Manual presetting Tuning to preset stations • You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the desired preset number. ENGLISH 1. Tune in the desired station with auto or manual tuning. 2. Press the (MEMORY/)ENTER button. • "MEM" is flickering for several seconds. 3. Select the desired preset number (1~30) and press the (MEMORY/)ENTER button.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 40 SIRIUS Satellite Radio (only for North America) ENGLISH • This receiver is a SIRIUS Satellite Radio Ready® receiver. You can receive SIRIUS® Satellite Radio by connecting to the SiriusConnect Home Tuner kit (sold separately) and subscribing the SIRIUS service.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 41 2. While displaying a category name, select the Direct search desired category, then press the ENTER button. • You can select a SIRIUS Satellite Radio channel directly by entering its number. ENGLISH 1. In the SIRIUS mode, press the SEARCH MODE button to select the direct search mode, then press the ENTER button. • Each time the SELECT ◀/▶ buttons are pressed, one of different categories is selected.
ENGLISH R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 42 Displaying SIRIUS information Parental lock • You can display SIRIUS information such as channel name, artist name, song title and signal strength. • You can lock the channels that you do not want to receive or unlock the previously locked channels. • In the SIRIUS mode, 1. Tune in the channel you want to lock or unlock. ■When tuning in the previously locked channels.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 43 Continued 2. Press the ENTER button. ", input the password (4-digit number) with using the NUMERIC (0~9) buttons. • Then “CUR ” is displayed for several seconds. • Each time the CURSOR UP(▲)/DOWN(▼) buttons are pressed, “EDIT CODE” or “PARENTAL” is selected. 3. Input the current code (4-digit number), then press the ENTER button. • When you input the correct code, the current channel is locked or unlocked.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 44 ENGLISH RECORDING • The analog signals from the EXTERNAL INs as well as the digital signals from the HDMI IN, the OPTICAL or the COAXIAL DIGITAL IN can be heard but cannot be recorded. • When recording the analog signals from CD, F.AUX, VIDEO 2~3, be sure to select "Analog" for the Audio Mode. (For details, refer to "When selecting the Audio Mode" on page 66.) • The volume and tone (bass, treble) settings have no effect on the recording signals.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 45 DIGITAL AUDIO RECORDING WITH MD RECORDER 2. For digital recording, select the digital input as • Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 46 OTHER FUNCTIONS ENGLISH Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90 → OFF Unit : minutes • While operating the sleep timer, " " lights up.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 47 ROOM 2 SOURCE PLAYBACk ■Notes: • The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room. • Only the (composite) video signals can be output to the different room. • When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input, no audio signal can be heard in the different room (ROOM 2).
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 48 When using the buttons on the remote control unit ENGLISH 1. Turn on the ROOM 2 function. • ROOM 2 ~ is displayed for several seconds. • Each time the ROOM 2 button is pressed, the ROOM 2 mode changes as follows : ON : To turn on the ROOM 2 function. ↕ ("R2" lights up.) OFF : To turn it off. ("R2" goes off) ■Note : • When the ROOM 2 mode is set to OFF, the ROOM 2 volume cannot be selected. 2. Select the desired input as a ROOM 2 source.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 49 • The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The OSD menu consists of 6 main menus ; system setup, speaker/room EQ setup, input setup, multi room setup, sound parameter and advanced video .
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 50 3. Enter the selected menu using the CURSOR RIGHT(▶) button. ENGLISH • When the CURSOR LEFT(◀) button is pressed on a submenu, etc., the previous menu will be returned to. ■When selecting the System Setup BACK Amp Assign Subwoofer mode HDMI Audio Output Tone Control Bass Treble Cinema EQ Momentary OSD Save/Recall ■When selecting the Speaker/Room EQ Setup NEXT BACK 53 ■When selecting the Input Setup BACK VIDEO 1 V2/iPOD VIDEO 3 BT CD TAPE F.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 51 Setup menu flow SYSTEM AMP ASSG (Amp Assign) AMP : B / R2 (Surr Back ȧ Room 2) / BI-A (Bi Amp) / SW MODE (Subwoofer Mode) SW M : NORM (Normal) / SW+ (Subwoofer Plus +) HDMI AUD (HDMI Audio Output) HDMI : SPK (Speaker) / PASS (HDMI Passthrough) TONE (Tone Control) TONE : OFF / ON BACK (Surround Back) / R2 (Room 2) (System Setup) BASS BASS : 0 dB / -10 ~ +10 TREBLE TRBL : 0 dB / -10 ~ +10 C-EQ (Cinema EQ) C-EQ : OFF / ON OSD (Momenta
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 52 Continued RE-NAME*1 VID1 CFG (Input Setup) (VIDEO1 Configuration) HDMIASSG (HDMI Assign) HDMI : HD1 ~ 4 (HDMI 1 ~ 4) / - - - V2IPDCFG CPN ASSG (Component Assign) CPN : CPN1 ~ 2 (Component 1 ~ 2) / - - - (VIDEO2/iPod Configuration) AUD ASSG (Audio Assign) AUD : OPT1 ~ 2 (Optical 1 ~ 2) / ENGLISH INPUT*3 VID3 CFG COX1 ~ 2 (Coaxial 1 ~ 2) / - - V.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 53 BACK Amp Assign Subwoofer mode HDMI Audio Output Tone Control Bass Treble Cinema EQ Momentary OSD Save/Recall NEXT • AMP Assign : To assign the surround back channels' power amplifier correctly depending on how to use the speakers. • Subwoofer Mode : To select the desired subwoofer mode. • HDMI Audio Output : To output the digital audio signals from the HDMI MONITOR OUT connector. • Tone Control : To adjust the tone (bass and treble) as desired.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 54 Continued When selecting the AMP Assign ENGLISH • The surround back channels' power amplifier can drive the surround back speakers, the ROOM 2 speakers or the front bi-amp capable speakers. Depending on how to use the speakers, you should assign the power amplifier correctly. (For details, refer to "CONNECTING SPEAKERS" on page 9 and "CONNECTING ROOM 2 OUTS" on page 11.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 55 Continued When selecting the Cinema EQ ENGLISH On : To compensate for edgy or shrill movie sound tracks. ↕ Off : To turn off the cinema EQ function. When selecting the Momentary OSD On : To turn on the OSD function that shows the status corresponding to each operation on this unit momentarily. ↕ Off : To turn it off. ■Note : • The OSD menu and the momentary OSD can be displayed via the HDMI MONITOR OUT only.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 56 ENGLISH SETTING THE SPEAkER / ROOM EQ SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 57 Continued 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Auto Setup, then press the CURSOR RIGHT(▶) Before starting the system, please plug the MIC. in using the front panel jack. BACK NEXT <> The test tone is LOUD. 3. Press the CURSOR RIGHT(▶) button to start the auto setup procedure. When the auto setup has been completed.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 58 ENGLISH When selecting the Room EQ • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 59 When selecting the Speaker Configuration 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Configuration, then press the CURSOR ENGLISH RIGHT(▶) button to enter the setting menu. BACK Front Center Surround Surr Back Subwoofer NEXT 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker, then press the CURSOR RIGHT(▶) button to enter its setting menu. 3.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 60 ENGLISH When selecting the Speaker Crossover • Set the crossover frequency according to the frequency characteristics of the speakers connected. (For details on the frequency characteristics, refer to the operating instructions of the speakers.) • If the frequency range of your speaker is 100 Hz ~ 20 kHz, the crossover frequency should be set to 100 Hz (or slightly higher).
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 61 When selecting the Speaker Distance 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Distance, then press the CURSOR BACK UNIT Front Left Center Front Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer NEXT 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item, then press the CURSOR RIGHT(▶) button to enter its setting menu. ■Note : • You cannot select the speakers set to "No". 3.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 62 ENGLISH When selecting the Channel Level • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("Calibrate"), not into preset memory("Save 1(Movie)", "Save 2(Music)"). • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes.(For details, refer to "Adjusting each channel level with test tone" on page 35.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 63 Continued 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the MODE on the Channel Level menu, then press the CURSOR RIGHT(▶) button to enter the setting menu. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired mode, then press the ENTER button. Calibrate : To memorize the adjusted channel levels into user’s memory. ↕ Save 1(Movie) : To memorize the adjusted channel levels into memory 1.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 64 SETTING THE INPUT SETUP ENGLISH BACK VIDEO 1 V2/iPOD VIDEO 3 BT CD TAPE F.AUX TUNER EXT.IN NEXT • This menu allows you to make the various settings depending on how to use the input sources connected to this receiver. When selecting the items other than Re-Name 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the CURSOR RIGHT(▶) button to enter the setting menu.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 65 Continued • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 3, EXT.IN. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 7.) • You can select the desired of HDMI 1 ~ HDMI 4.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 66 Continued ■When selecting the Audio Mode ENGLISH • You can select the desired audio input signal to be played. ■Notes : • Be sure to set the Audio Mode to the audio input which is connected and assigned to the selected input source. • When the HDMI Audio Output is set to HDMI Passthrough, no sound will be heard from the speakers connected to this receiver (except ROOM 2 speakers).
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 67 Continued • When the source components that cannot support the HD audio signal format (such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, DTS-HD Master Audio, etc.) are connected to the HDMI IN of this receiver, some components may not output any audio signals from its HDMI OUT. In this case, you should set the HD Audio to Off to play the audio signals other than the HD audio signals.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 68 Continued 3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired digit. ENGLISH • Then the cursor moves to the desired digit. 4. Press the CURSOR UP(▲)/DOWN(▼) buttons to enter the desired character on the selected digit. • You can enter the desired among blank, A~Z, a~z, 0~9, (, ), +, ,, ― , ., /. 5. Repeat the above steps 3 and 4 to enter the desired characters on the rest of the digits.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 69 SETTING THE MULTI ROOM SETUP BACK Room 2 Set Input Volume NEXT • Room 2 : To turn on or off the ROOM 2 function. • Input : To select the desired ROOM 2 source. • Volume : To adjust the volume on the power amplifier assigned to "Surr Back ↔Room 2" or "Room 2". ■Notes: • The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 70 ENGLISH SETTING THE SOUND PARAMETER BACK Dolby Pro Logic II Music Panorama Center Width Dimension Night Mode Dolby Dolby TrueHD NEXT • Dolby Pro Logic II Music : To adjust the various surround parameters for optimum surround effect. • Night Mode : To adjust the dynamic range compression that makes faint sound easier to hear at low volum levels. 1.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 71 BACK PReP Detail Enhancement Edge Enhancement Mosquito NR Test Patterns OSD Transparency NEXT • PReP : To improve the progressive video signal by progressive reprocessing. • Detail Enhancement : To enhance the entire picture by making details stand out. • Edge Enhancement : To enhance the picture by sharpening object edges. • Mosquito NR : To remove the mosquito noise. • Test Patterns : To select the desired test pattern.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 72 Troubleshooting Guide ENGLISH If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty. PROBLEM POSSIBLE CAUSE REMEDY No power • The AC input cord is disconnected.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 73 ■AMPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 1.0 %, 40 Hz~20 kHz | 2× 100 W • Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.01% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 95 W | 0.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 74 Setup Code Table ENGLISH TV AOC Admiral Aiko Akai Alaron Ambassador America Action Ampro Anam Audiovox Baysonic Belcor BenQ Bell & Howell Bradford Brockwood Broksonic CXC Candle Carnivale Carver Celebrity Cineral Citizen Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Dwin Electroband Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter 005 041 014 005 026 024 027 043 027 030 027 003 051 019 027 003 028 027
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 75 Radio Shack Realistic Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Sherwood Shogun Signature Sony Soundesign Squareview Starlite Supreme Sylvania Symphonic TMK Tandy Technics Technoi Ace Techwood Teknika Telefunken Toshiba Totevision Vector Research Victor Vidikron 005 022 003 008 007 025 002 008 007 037 007 003 019 011 002 027 005 012 006 030 031 019 003 025 028 007 011 027 020 041 000 003 001 0
ENGLISH R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 76 Headquarter Hitachi JVC Jensen KEC KLH Kenwood Kodak LXI Lloyd’s Logik MEI MGA MGN Technology MTC Magnasonic Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NEC Nikko Noblex Olympus Opimus Orion Panasonic Penny Pentax Philco Philips Pilot Pioneer Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA Radio Shack Radix Randex 011 034 014 026 005 015 014 004 005 034 015 004 023 023 023 025 004 023
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 77 Magnin Memorex Mitsubishi Orion Panasonic Penney Quasar RCA Sansui Sanyo Sear Sharp Sony Symphonic Zenith 004 (TV use 008) 034 034 034 023 016 (TV use 010) 004 (TV use 008) 034 023 005 028 (TV use 042) 027 (TV use 041) 001 004 (TV use 008) 028 (TV use 042) 004 (TV use 008) 023 028 (TV use 042) 004 (TV use 008) 028 (TV use 042) 013 (TV use 007) 004 (TV use 008) 027 (TV use 041) 034 023 034 005 027 (TV use 041) 002 (TV use 050) 034 034 CBL ABC Alleg
ENGLISH R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 78 Tusa TV86 Unika Universal Viewstar Zenith Zentek 010 015 018 018 015 024 022 AUX-LD Denon Mitsubishi NAD Pioneer Sony 019 SAT AlphaStar Chaparral Echostar Expreevu General Instrument Hitachi HTS Hughes Net.
R-774(A)_ENG_091204:R-774(A) 2009-12-21 오후 2:21 페이지 79 GE Lutron One For All Radio Shack Security System Universal X10 X10 Hitachi JVC Kenwood Krell LXI Linn MCS MTC Megavox Marantz Mission NSM Nikko Onkyo Opimus 043 044 042 043 042 042 042 AUX-DBS Aiwa Fisher Harman/Kardon JBL JVC Jerrold RCA Scientific Artlanta Sony Starcom 045 005 046 046 047 031 006 032 045 031 029 Panasonic Parasound Philips Pioneer Proton QED Quasar RCA Realistic Rotel SAE Sansui Sanyo Scott Sears Sharp Sherwood AUX-VIDEO A
cover_774:cover_7503A 2009-11-13 오후 2:34 페이지 2 R-774 5707-00000-272-0S