Operation Manual

ENGLISH

Standby mode - Switched AC outlet off

Power - on mode - Switched AC outlet on

12. SWITCHED AC OUTLET

13.

AC INPUT

• This outlet is switched on (power-on mode) and off

(standby mode) according to power control as

follows (Maximum total capacity is 100 W (0.43A)).

• Plug the supplied AC input cord into this AC inlet

and then into the wall AC outlet.

󰥒Note:

• Do not use an AC input cord other than the one

supplied with this unit. The AC input cord

supplied is designed for use with this unit and

should not be used with any other device.

• This receiver incorporates USB as well as RS-232C

terminal that may be used in the future to update the

operating software so that it will be able to support

new digital audio formats, external control by using an

external device and the like.

• Connect either USB or RS-232C terminal to your PC

(you don't need to do both).

󰥒Notes:

• Programming for upgrades and external control requires specialized programming knowledge and for that

reason we recommend that it only be done by qualified installers. For more information on future upgrades

and external control, visit the Sherwood web site at www.sherwoodamerica.com or contact your dealer.

• Do not disconnect the connection cable while updating the operating software, etc.

Should this happen, it may be result in malfunction or cause damage to the unit.

11. CONNECTING PC FOR UPGRADES