Introduction This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ENGLISH CONTENTS Introduction READ THIS BEFORE OPERATING YOUR UNIT | 3 | 5 System Connections Front Panel Controls | 9 Universal Remote Controls | 10 OPERATING COMPONENTS WITH REMOTE CONTROL REMOTE CONTROL OPERATION RANGE LOADING BATTERIES | 12 | 12 | 12 USING FUNCTIONS OF REMOTE CONTROL | 13 Before Operation SURROUND SOUND | 16 Operations TURNING THE POWER ON/OFF | 21 LISTENING TO A PROGRAM SOURCE ENJOYING SURROUND SOUND | 22 | 24 LISTENING TO RADIO BROADCASTS | 31 LISTENING TO RDS B
• Do not plug the AC input cord into the wall AC outlet until all connections are completed. • Be sure to observe the color coding when connecting audio and video cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. 1 4 5 8 ANTENNA S-VIDEO FM 75 OPT 1 AM DIGITAL OUT OPT 2 COAX OPT FRONT SPEAKERS(6 VIDEO CENTER GND IN OUT IN IN IN VIDEO 2 VIDEO 3 AUX IN OUT FRONT SURROUND SURR.
ENGLISH 2. CONNECTING DIGITAL INs and OUT • The COAXIAL or the OPTICAL DIGITAL OUTs of the components that are connected to AUX and VIDEO 1~3 of this unit can be connected to these DIGITAL INs. • If a digital recorder or other component with OPTICAL DIGITAL IN/OUT jacks is connected to the corresponding jacks of DIGITAL OUT this unit, you can playback and/or record the high quality sound of CD’s, etc. without analog conversion or degradation.
VCR, DVD player/recorder, etc. AUDIO AUDIO OUT IN R LR VIDEO IN S-VIDEO S-VIDEO OUT IN L MONITOR 2 Additional TV, projector, etc. VIDEO OUT OUT IN IN VIDEO IN S-VIDEO IN MONITOR IN VIDEO1 IN ENGLISH VIDEO 1 VIDEO2 IN OUT MONITOR VIDEO1 IN S-VIDEO IN OUT VIDEO2 VIDEO3 IN IN MONITOR 1 2 VIDEO IN IN IN VIDEO 2 VIDEO 3 OUT VIDEO 1 IN VIDEO 3 • The jacks of VIDEO 1 may also be connected to a VCR, DVD recorder or other digital video recording component.
5. CONNECTING 7 CH DIRECT INPUTS 7. CONNECTING SPEAKERS Front right Front left ENGLISH VIDEO CENTER IN OUT TAPE FRONT SURROUND SURR.BACK Surround back SUB WOOFER FRONT SPEAKERS(6 ) SUBWOOFER OUT SURROUND SPEAKERS(6 ) SURR.
ENGLISH Front Panel Controls FLUORESCENT DISPLAY 1. Input, frequency, volume level, 10 9 8 7 operating information, etc. 6 2. Surround mode indicators 3. AUTO indicator 4. DIGITAL input signal indicator 5. PRESET number, SLEEP time, Speaker distance display 6. MEMory indicator 1 2 3 4 7. DIRECT indicator 5 8. TUNED indicator 9. STEREO indicator 10.
ENGLISH Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, cassette decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc. • To operate 7 components other than this receiver, you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 13.
Device to be controlled Button symbol CD AUX TV VCR DVD CABLE SAT (for CD player) (for tape deck) (for TV) (for VCR) (for DVD player) (for cable box) (for satellite receiver) POWER POWER POWER POWER POWER POWER POWER STANDBY (POWER OFF) STANDBY (POWER OFF) STANDBY (POWER OFF) STANDBY (POWER OFF) STANDBY (POWER OFF) STANDBY (POWER OFF) STANDBY (POWER OFF) CHANNEL LEVEL UP/DOWN ( / ) CHANNEL LEVEL UP/DOWN ( / ) POWER 1 STANDBY 2 3 CHANNEL LEVEL CHANNEL LEVEL UP/DOWN ( / ) UP
ENGLISH OPERATING COMPONENTS WITH REMOTE CONTROL 1 Enter the setup code for each component other than this receiver you wish to control. For details, refer to “Entering a setup code” on page 13. 2 Turn on the component you want to operate. REMOTE CONTROL OPERATION RANGE • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.
• This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system remote control operation, “000” was stored previously in the memory of the device button “CD” for Sherwood CD player, “DVD” for Sherwood DVD player and “AUX” for Sherwood tape deck respectively as its factory setup code.
ENGLISH Using a punch-through function This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch-through in conjunction with any of the eight components controlled by this remote control. For example, since this receiver will likely be used as the sound system while watching TV, you may want to adjust this receiver’s volume although this remote control is set to control the TV.
• The macro function enables you to program a series of button operations(up to 10) on this remote control into a single button. • You can store up to three separate macro command sequences into “M1”, “M2” and “M3” buttons. Press the operation buttons you want to program in order. Note: You should press the corresponding DEVICE buttons before pressing each operation button. Example) When playing a DVD on the DVD player connected to VIDEO 2 jacks of this receiver. 1.
Before Operation ENGLISH SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. Surround modes DTS Digital Surround DTS Neo : 6™ surround DTS Digital Surround(also called simply DTS) is a multichannel digital signal format which can handle higher data rates than Dolby Digital. Although both Dolby Digital and DTS are 5.
Dolby Virtual This mode employs sophisticated digital processing to create the illusion of “phantom” speakers, this mode allows you to experience surround sound effects from Dolby Digital, Dolby Surround or 2-channel (recorded in digital PCM or analog stereo) sources, through just a single pair of front speakers. The surround channel is monaural, but is played through both surround speakers. Manufactured under license from Dolby Laboratories.
For your reference, the sound from each channel can be reproduced according to the surround modes as follows: Channels Modes FRONT L/R CENTER SURROUND L/R SURROUND BACK SUBWOOFER ENGLISH DTS DTS ES DISCRETE/MATRIX DTS NEO MOVIE/MUSIC DOLBY DIGITAL DOLBY DIGITAL EX DOLBY PRO LOGIC DOLBY PRO LOGIC II MOVIE/MUSIC DOLBY VIRTUAL MPEG MATRIX Other Surround STEREO 7 CH DIRECT Depending on the speaker settings and the number of the encoded channels, the sound from the corresponding channels cannot be reprod
Adjusting the speaker settings Setting the type of speakers The composition of the signals output from the different channels and the frequency reponse are adjusted automatically according to the combination of speakers actually being used.
ENGLISH Refer to the previous page and adjust the speaker settings • You can also adjust these settings with using the buttons on the front panel.(For details, refer to “SETTING UP THE SYSTEM ON FRONT PANEL” on page 43.) Note : When the headphones are plugged or the 7 CH DIRECT is selected as an input source, the speaker setting function cannot be available. 1. When selecting each setting mode 2.
• When selecting the front right distance mode, “FRONT R 3.0 (m)” • When selecting the center distance mode, “CENTER 3.0 (m)” • When selecting the surround left distance mode, “SURR L 3.0 (m)” Note: • When the type of speaker is set to “N”, its distance mode cannot be selected. • When selecting the surround right distance mode, “SURR R 3.0 (m)” • When selecting the Dolby Virtual delay time mode, “NARROW” NARROW : Relatively long distance for the main listening position to front speakers.
ENGLISH LISTENING TO A PROGRAM SOURCE 1 Select the desired input source. When AUX, VIDEO 1~3 is selected as an input source 2 7 CH DIR. TUNER AUX TAPE VIDEO1 VIDEO2 VIDEO3 INPUT SELECTOR or Select the digital or analog input connected as desired.
5 Adjust the (overall) volume. VOLUME • When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 24. 6 To mute the sound, 7 To listen with the headphones, PHONES MUTE • The sound from the speakers is cut off. • When listening to a DTS, Dolby Digital or MPEG program source, if the headphones are plugged, it enters the 2-CH downmix mode automatically. (For details, refer to “Downmixing into 2 front channels”on page 30.) • “MUTE” will flicker.
ENJOYING SURROUND SOUND ENGLISH • When the AUTO OSD function is on, the corresponding setup display is on the TV screen. Selecting the surround mode • You can also select the surround mode with using the buttons on the front panel. (For details, refer to “SETTING UP THE SYSTEM ON FRONT PANEL” on page 44.
• You can adjust the level of test tone for each channel so that they are all heard at the same level. Note : When the 7 CH DIRECT is selected as an input source or the headphones are plugged, the test tone function does not work. 1 • The test tone will be heard from the speaker of each channel for 2 seconds as follows: FL C FR SR Enter the test tone mode. Front Left Center T.
ENGLISH 2 3 Adjust the level of the selected channel as desired. CH/LEVEL Repeat the above steps 1 and 2 to adjust each channel level. • If the channel display disappears, start from the step 1 again. Presetting and Calling the channel levels • You can store the adjusted channel levels in the memory. If you change the channel levels and want to hear with preset levels, you can call them again.
• You can adjust the LFE(Low Frequency Effect) levels included in Dolby Digital, DTS and MPEG program sources. While displaying “DD L”, each time the button below is pressed, the mode changes as follows: ENGLISH 2 Adjusting the LFE level DECODING TUNE MODE 1 Press the SETUP button for more than 2 seconds, then it enters the setup mode. While displaying the setup mode, press this button short repeatedly until “DD L” is displayed.
ENGLISH 3 While displaying the desired tone mode, adjust the tone as desired. • Each adjustable range of bass and treble is -10~+10. • In general, we recommend the bass and the treble to be set to 0(flat) level. • At “TONE ON” mode, you can select “TONE OFF” mode and vice versa. ADJUST TUNING/PRESET TONE ON: When adjusting the tone for your taste. (“DIRECT” indicator goes off.) TONE OFF: When listening to a program source without the tone effect. (“DIRECT” indicator light up.
• When selecting the Dolby Pro Logic II Music mode, you can adjust the various surround parameters for optimum surround effect. • You can also adjust the Dolby Pro Logic II Music parameters with using the buttons on the front panel. (For details, refer to “SETTING UP THE SYSTEM ON FRONT PANEL” on page 43.) 1 Press the PL II MUSIC PARAMETER button to select the desired parameter. PL II PARA.
ENGLISH Downmixing into 2 front channels • To cancel the 2 - CH downmix mode, select the desired surround mode with the DSP MODE DOWN ( ) or UP( ) button. • When the playback of the source on the player is stopped, interrupted, etc., the 2 - CH downmix mode is not canceled even though “ ST” and the DTS or Dolby Digital indicators go off.
ENGLISH LISTENING TO RADIO BROADCASTS To select the tuner, TUNER INPUT SELECTOR or To select the desired band • Each time this button is pressed, the band is changed as follows: FM STEREO FM MONO AM DIGITAL INPUT AM/FM MODE BAND • When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, the FM broadcasts are reduced in monaural sound.
ENGLISH Presetting radio stations 2 • You can store up to 30 preferred stations in the memory. 1 Press the MEMORY button. SETUP MEMORY Tune in the desired station with auto or manual tuning. • “MEM” is flickering for 5 seconds. 3 Select the desired preset number (1~30) and press the MEMORY button. • The station has now been stored in the memory. • A stored frequency is erased from the memory by storing another frequency in its place. • If “MEM” goes off, start again from the above step 2.
LISTENING TO RDS BROADCASTS(FM ONLY) 2 RDS search • Use this function to automatically search and receive the stations offering RDS services. 1 TUNING/PRESET or • The tuner automatically searches stations offering RDS services and the station name is displayed. • If the station found is not the desired one, press the ADJUST/TUNE/PRESET UP(>/ /+) or DOWN(
ENGLISH 3 TUNE -, + PRESET -, + ADJUST TUNING/PRESET or 2 EON PTY (EON: Enhanced Other Networks information) • Use this function to automatically search and receive the desired program type while listening to a RDS station. 1 • The tuner automatically searches a station offering PTY services. • If no station is found, “NO PROG” is displayed. While the PTY indicator is flickering, select the desired program type.
• The analog signals (except front L/R channel) from the 7 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital input cannot be recorded. • The volume and tone (bass, treble) settings have no effect on the recording signals. Recording with TAPE 1 Select the desired input as a recording source except for TAPE. TUNER AUX VIDEO1 VIDEO2 VIDEO3 INPUT SELECTOR or Dubbing from video components onto VIDEO 1 1 2 Start recording on the TAPE.
ENGLISH 3 Start recording on the VIDEO 1. 4 Start play on the AUX and the VIDEO 2 respectively. • The audio signal from the AUX and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers. If you select AUX for hearing and VIDEO 1 for seeing, whenever you select AUX, the VIDEO 1 is selected automatically as video input source. So you are sure to be observe the order and doing of the above steps 1 and 2.
Operating the sleep timer • The sleep timer allows this unit to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time.
ENGLISH Using the OSD This unit incorporates an OSD(On-screen display) function to provide information about basic operation of this unit and to simplify the setup procedures. The OSD function uses a monitor TV connected to this unit as a display and has two kinds of display modes such as current status display and menu screen. Notes: • Any on-screen display shown on the monitor TV will not be recorded onto VIDEO 1.
3 Confirm your selection. CURSOR ENTER When selecting the SPEAKER SETUP When selecting the FUNCTION SELECT When selecting the SURROUND MODE • Only when one of TUNER, TAPE, 7 CH DIRECT and AUX is selected, you can select a video input source on the VIDEO SELECT menu and enjoy the audio and video signals separately. • When dubbing them onto VIDEO 1, select either VIDEO 2 or VIDEO 3 on the VIDEO SELECT menu. • The displayed surround mode changes depending on the input signal format.
ENGLISH When selecting the CH LEVEL SETUP When selecting PRESET TRIM menu When selecting CH LEVEL TRIM menu • You can adjust the preset channel level in PRESET TRIM menu. The adjusted is(are) memorized in preset channel level. • You can adjust the current channel level in CH LEVEL SETUP mode. The adjusted is(are) just memorized, not in preset channel level.
Troubleshooting Guide PROBLEM POSSIBLE CAUSE No power • The AC input cord is disconnected. • Poor connection at AC wall outlet or the outlet is inactive. Power shuts off abruptly during operation The protection circuit is activated by the following causes. • Speaker terminals are short-circuited. • Speaker settings are not adjusted correctly. • This unit is operated for long periods of time at extreme sound levels. REMEDY • Connect the cord securely.
Specifications ENGLISH Amplifier Section Power output, stereo mode, 6 Ω, THD 0.3 %, 40 Hz~20 kHz | 2 100 W Total harmonic distortion, 6 Ω, 50 W, 1 kHz | 0.09% Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 100 W | 0.1% Input sensitivity, 47 kΩ Line (AUX) | 200 mV Signal to noise ratio, IHF “A” weighted Line (TAPE) | 95 dB Frequency response 3 dB Line (AUX, TAPE), 20 Hz~44 kHz | Output level TAPE OUT, 2.
Appendix • When the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of this unit is required by the following procedure. 1 2 In standby mode, press SETUP and DECODING buttons at the same time. SETUP DECODING MEMORY TUNE MODE After seeing the flickering standby indicator, take your hand(s) off from buttons.
ENGLISH [1] Surround mode [2] TUNE MODE STEREO(or 2 CH DOWNMIX) mode : not available when the input signal is 96kHz PCM or headphone is used. ( ): Possible when the digital signals from the DTS or Dolby Digital program sources are being input. Speaker setup mode (“FL - CL - SL”) CFREQ80 NARROW SURROUND 3.0(m) CENTER 3.0(m) FL-CL-SL SUR B - L SUB W-Y FRONT 3.0(m) Channel level trim mode (“FL 0”) FL [1] Preset channel level mode C FR [3] Confirm your decision.
SETUP CODE TABLE ADMIRAL AKAI ALBA ALBIRAL ALCATEL AMSTRAD ANAM ARC EN CIEL ARISTONA ARTHUR MARTIN ASA ATLANTIC AUDIOSONIC AUSIND AUTOVOX BAIRD BASICLINE BAUR BEKO BLAUPUNKT BRANDT BRION VEGA BRUNS BSR BUSH CENTURY CGE CIHAN CLARIVOX CONDOR CONTEC CONTINENTAL EDITION CROSLEY CROWN CTC CLATRONIC DAEWOO DECCA DEGRAAF DIXI DRYNATRON DUAL DUAL-TEC DUMONT ELBE ELBIT 050 093 068 116 022 000 155 028 099 078 053 125 050 099 054 053 099 083 006 011 023 094 028 050 048 059 033 098 016 065 048 099 087 028 101 147 04
INNO HIT ENGLISH INTERFUNK IRRADIO ITT JVC KTV KAISUI KARCHER KENDO KENNEDY KORTING KRIESLER LENOIR LOEWE OPTA LOGIK LUMA LUXOR MAGNADYNE MAGNAFON MARANTZ MATSUI McMICHAEL MEMOREX METZ MINERVA MISTRAL MITSUBISHI MIVAR MULTITECH MURPHY MAONIS NATIONAL NEC NECKERMANN NEI NIKKAI NOBLEX NOBLIKO NOGAMATIC NOKIA 093 090 047 142 093 001 123 135 033 099 006 006 098 144 050 099 078 099 008 072 118 049 058 135 046 127 046 049 158 134 088 090 094 094 149 033 118 097 046 134 096 042 033 099 049 060 015 098 028 001
SANYO SBR SCHAUB LORENZ SCHNEIDER SEG SEI SELECO SHARP Sherwood SIAREM SICATEL SIEMENS SIERA SILVER SINGER SINUDYNE SONOKO SONY STERN TANDBERG TANDY TASHIKO TATUNG TEC TELEAVIA TELEFUNKEN TELETECH TELEVIDEON TENSAI THOMSON THORNFERGUSON TOCOM TOSHIBA TRANS CONTINENTS TRIUMPH UHER ULTRA VOX 046 121 015 090 001 060 049 001 129 096 141 132 046 158 016 069 033 000 046 116 005 087 099 078 054 016 158 049 146 096 133 099 002 099 096 028 081 028 090 099 049 012 145 097 051 053 115 077 026 151 002 113 142 0
ENGLISH FUNAI GE GENERAL GOLDSTAR GOODMANS GRAETZ GRANADA GRUNDIG HANSEATIC HARMANKARDON HIFIVOX HINARI HITACHI IMPERIAL INGELEN INGERSOL ITT JENSEN JVC KENWOOD KRIESLER KUBA LLOYD LOEWE OPTA LOGIK LUXOR MAGNADYNE MAGNASONIC MAGNAVOX MARANTZ MATUI MEMOREX METZ MGA MINERVA MINOLTA MITSUBISHI MTC MULTITECH MURPHY NAONIS NATIONAL NEC NECKERMANN NOGAMATIC NOKIA NORDMENDE OPTONICA ORION 011 019 014 004 008 041 003 014 054 043 004 042 002 006 011 042 027 005 033 042 042 005 045 043 011 014 008 033 041 038 019 0
TOSHIBA TOTELEVISION UHER ULTRA VOX UNITECH UNIVERSUM URANYA VECTOR VICTOR VIDITAL WESTING HOUSE WARDS YAMAHA ZANUSSI ZENDER ZOPPAS CBL 042 056 052 039 036 001 013 042 041 013 041 041 004 042 041 041 019 004 042 052 042 042 059 030 052 034 042 056 017 058 052 ABC 014 Allegro Archer Bell&Howell Century Citizen Comtronics Contec Easten Emerson Everquest Focus Garrard Gemini General Instrument GoldStar Goodmind Hamlin Hitachi Hytex Jasco Jerrold 043 060 042 056 052 056 DVD DENON GE JVC
ENGLISH Stargate Starquest TV86 Teleview Tocom Toshiba Tusa Unika United Artists Universal Viewstar Zenith Zentek 010 010 015 014 007 000 010 018 007 153 015 000 022 014 026 MAGAI MARANTZ MASPRO MATSUSHITA METZ MINERVA MULTISTAR MURATO NEC NEIRU NOKIA NORSAT PACE PANASONIC PHILIPS PHONOLA PROSAT PYE QUADRAL QUELLE RADIOLA REDIFFUSION SABA SALORA SAMSUNG SAT PARTNER SATPORTNER SCHAUB LORENZ SCHNEIDER SIEMENS SIERA SILVA SKY STARCOM STARSAT TECHNISAT TELEFUNKEN TELESYSTEM THORNFERGUSON 008 019 024 SAT
ADCOM AIWA AKAI AUDIO ARC EN CIEL DENON FISHER H/K JVC KENWOOD MARANTZ MONDIAL NAD NAKAMICHI NIKKO ONKYI PANASONIC PHILPS PIONEER RCA REALISTIC SANSUI SHARP SHERWOOD SONY TEAC TECHNICS VICTOR YAMAHA AUX-TAPE/MD 021 045 046 016 036 230 054 006 017 028 003 015 033 048 049 016 013 051 014 005 007 045 040 019 000 058 050 055 051 001 044 SHERWOOD 039 022 014 027 012 034 020 014 047 001 010 002 042 037 052 011 008 009 041 053 035 030 029 021 019 025 026 052 043 016 AUX-LD 018 DAEWOO DENO
