Troubleshooting guide

• You can also select the surround mode with using the buttons on the front panel.

(For details, refer to “SETTING UP THE SYSTEM ON FRONT PANEL” on page 43.)

• Each time the DSP MODE

or button is pressed, the surround mode changes depending on the signal format being

input and the selected decoding mode as follows :

Signal format being input Selected decoding mode Selectable surround mode

Dolby Digital 5.1, IN-AUTO mode (DOLBY DIGITAL EX,) DOLBY DIGITAL,

Dolby Digital EX 6.1 channel sources DOLBY VIRTUAL

Dolby Digital 2-channel IN-AUTO mode (DOLBY DIGITAL EX,) PL II CINEMA, PL II

sources MUSIC, PRO LOGIC, DOLBY VIRTUAL

PCM(2 channel) sources IN-AUTO, IN-PCM mode PL II CINEMA, PL II MUSIC, PRO LOGIC,

Analog stereo sources DOLBY VIRTUAL, NEO 6 CINEMA, NEO 6

MUSIC, THEATER, MOVIE, HALL 1/2,

STADIUM, CHURCH, CLUB 1/2, ARENA 1/2,

GAME, MATRIX

DTS sources IN-AUTO, IN-DTS mode corresponding DTS mode

MPEG sources IN-AUTO mode corresponding MPEG mode

( ): possible only when surround back speaker setting is not “N”.

• When 96 kHz PCM signals are input, the stereo mode is selected automatically; the surround mode cannot be selected.

• When DTS or MPEG signals are input in the IN-AUTO or IN-DTS mode, the corresponding DTS or MPEG mode will

be selected regardless of using the DSP MODE

or button.

Notes:

• When the selected decoding mode is not matched to the input signal format, the “DIGITAL” indicator flickers and

no sound is heard. Therefore, be sure to select the required decoding mode and the available surround mode

according to the input signal format.

• When the 7 CH DIRECT is selected as an input source, the decoding and surround modes cannot be selected.

• When the digital signals are not input, the desired surround mode cannot be selected.

• When the headphone is used, the surround mode cannot be selected.

To cancel the surround mode for stereo operation

• Then the stereo mode is selected.

• To cancel the stereo mode, select the desired surround mode with using the DSP MODE

or button.

ENGLISH

ENJOYING SURROUND SOUND

Selecting the surround mode

• When the AUTO OSD function is on, the corresponding setup display is on the TV screen.

DSP

STEREO