Operation Manual

42
■Configuring the VuNow Pod using Advanced
• The Advanced option enables you to manually configure
the VuNow Pod on your home network in the Wired and
the Wireless mode.
Configuring the VuNow Pod using the Advanced option is
recommended only if you are aware of the settings used
for your home network and can customize them.
✽
Advanced Wired Mode
Network
The VuNow Pod can be connected to your home network
with wired connection or wireless connection. (For details,
refer to “CONNECTING TO NETWORK” on page 10.)
The network connection can be established by using the
“Network Wizard” or “Advanced” options available within the
VuNow Pod.
■Configuring the VuNow Pod using Network Wizard
It provides you with the option to select wired or wireless
mode. Wired is the recommended mode to be used while
connecting the VuNow Pod to a network.
✽
Wired Network connection
• Then the configuration type screen appears.
• Then the network type screen appears.
1. Select “Settings” from home page.
2. Select “Network” in “Settings” section.
3. Select “Network Wizard”.
• Then the VuNow Pod automatically detects your Home
Network, Internet settings and VuNow Pod Server
settings and conducts a download speed test of the
connection.
4. Select “Wired [Preferred]”.
5. Select “Done” to confirm successful connection
establishment.
5. Enter the WEP key for the wireless network and
press “OK” key.
6. Select “Done” to confirm successful connection
establishment.
1. Perform the steps 1~3 in “Wired Network
connection” procedure above.
• Then the Wireless Network list appears.
• In such a case that the WEP input list appears, perform
the following steps 4 and 5.
2. Select “Wireless”.
3. Select your wireless network.
• Then the soft keypad appears.
• Then the VuNow Pod automatically detects your Home
Network, Internet settings and VuNow Pod server
settings and conducts a download speed test of the
connection.
4. Select your WEP key type.
✽
Wireless Network connection
• Then the configuration type screen appears.
• Then the “Settings” screen appears.
1. Select “Settings” from home page.
2. Select “Network” in “Settings” section.
3. Select “Advanced”.
ENGLISH
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 42