Operation Manual

43
• The table below describes the options available on the
“Settings” screen.
Option
Name
Option Type Description
Network
W
ired,
Wireless
According to your home network
c
onnection, choose it.
IP Settings Auto, Static
Choosing Auto would enable
DHCP service, or you can set it to
static. By default, the Auto is set.
Following fields have to be set manually if the IP Settings is
set to static.
IP Address IP address
The IP address of the VuNow
Pod.
Subnet Mask Subnet mask Subnet mask of your network.
Gateway
G
ateway IP
address
IP address of the gateway.
DNS
DNS server IP
address
IP address of the DNS server.
Cancel To exit Network.
Save To confirm the settings.
4. Set the “Network” to “Wired”.
5. Set each setting and select “Save” on the
“Settings” screen.
4. Select “Scan” to search for available wireless
networks at “SSID” option.
6. Set each setting and select “Save” on the next
screen.
1. Perform the steps 1~3 in “Advanced Wired
Mode” procedure on the previous page.
2. Set the “Network” to “Wireless”.
5. Select your wireless network.
3. Set each setting and select “Next” on the
“Settings” screen.
• Then the next screen appears displaying settings such as
SSID, Security and so on.
• Then the wireless network list appears.
✽
Advanced Wireless Mode
ENGLISH
Upgrading the VuNow Pod from the Vunow
Server
• If you may receive a message to upgrade the VuNow
Service, we recommend that you upgrade your VuNow
Service immediately.
■Notes:
• It is recommended that you upgrade to the latest version
to enjoy the new features available. Other reason for
upgrading are to fix known security holes and bugs.
• If you do not get the upgrade message, please go to
“Settings” -> “Product Settings” -> “Product Info” and note
down the product ID, client version and server version. E-
mail the data to the contact details provided at
[e-mail]
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 43