Operation Manual

54
ENGLISH
SETTING THE MULTI ROOM SETUP
• ROOM2 (ROOM2 mode) : To turn on or off the ROOM2 function.
• R2 (ROOM2 input) : To select the desired ROOM2 source.
• R2VOL (ROOM2 volume) : To adjust the ROOM2 volume.
■Notes :
• To select “MLT ROOM”, set the “AMP” to “R2” first. (For details, refer to “When selecting the AMP ASSIGN” on page 48.)
• Only the analog input signal from the ROOM2 source can be heard. So, be sure to make analog audio connection and select
analog input for ROOM2 source.
• The ROOM2 function allows enjoying one source in the main room and playing another in a different room at the same time.
1. Press the CURSOR LEFT/RIGHT buttons to set the ROOM2 mode as desired.
2. Press the CURSOR UP/DOWN buttons to select the desired item.
3. Press the CURSOR LEFT/RIGHT buttons to set the selected item as desired.
SET RMEQ
MLT ROOM
AMP : BACK / R2
TONE : OFF / ON
PWR-M : OFF / 60 / 30 / 10 / ON
F : LARGE / SMALL
C : LARGE / SMALL / NO
S : LARGE / SMALL / NO
SB : LX2 / LX1 / SX2 / SX1 / NO
SW : YES / PLUS / NO
TRE : 0 / -10 ~ +10
BASS : 0 / -10 ~ +10
ROOM2 : OFF / ON
R2 : TUNER / CD / AUX / F.AUX / VIDEO 1/ V2/IPD
R2VOL : 40 / MIN(0) ~ MAX(80)
SPK CFG
X.OVER X.OVER : 50 / 80 / 100 / 150 / 200
CH LEVEL
DISTANCE
T. TONE : M / A
L : 0 dB / -15 ~ +15
C : 0 dB / -15 ~ +15
R : 0 dB / -15 ~ +15
SR : 0 dB / -15 ~ +15
SBR : 0 dB / -15 ~ +15
SBL : 0 dB / -15 ~ +15
SL : 0 dB / -15 ~ +15
SW : 0 dB / -15 ~ +15
L : 10.0 FT / 0.1 ~ 30.0
C : 10.0 FT / 0.1 ~ 30.0
R : 10.0 FT / 0.1 ~ 30.0
SR : 10.0 FT / 0.1 ~ 30.0
SBR : 10.0 FT / 0.1 ~ 30.0
SBL : 10.0 FT / 0.1 ~ 30.0
SL : 10.0 FT / 0.1 ~ 30.0
SW : 10.0 FT / 0.1 ~ 30.0
• Each time these buttons are pressed, the ROOM2 mode changes as follows :
ON : To turn on the ROOM2 function. (“R2” lights up.)
↕
OFF : To turn it off. (“R2” goes off.)
■Notes :
• When the ROOM2 mode is set to OFF, you cannot select the ROOM2 input and adjust the ROOM2 volume.
• When you do not use the ROOM2 function, turn off the ROOM2 function to save electricity.
■When selecting the ROOM2 input
• You can select the desired among CD, AUX, F.AUX, TUNER, VIDEO1, V2/IPD.
■Note :
• You cannot select VuNow as a ROOM2 source.
■When selecting the ROOM2 volume
• You can adjust the ROOM2 volume within the range of 0 ~ 80 dB.
■When the ROOM2 mode is set to ON
R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 54