606i(G) cover_cover.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 2 Introduction ENGLISH READ THIS BEFORE OPERATING YOUR UNIT CAUTION This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 3 CONTENTS Introduction System Connections | 4 Front Panel Controls | 10 Remote Controls | | 2 ENGLISH • READ THIS BEFORE OPERATING YOUR UNIT 12 • REMOTE CONTROL OPERATION RANGE • LOADING BATTERIES | | 13 13 Operations • LISTENING TO A PROGRAM SOURCE • SURROUND SOUND | | 14 16 • ENJOYING SURROUND SOUND | 17 • LISTENING TO RADIO BROADCASTS | 22 • LISTENING TO RDS BROADCASTS(FM ONLY) | 24 (RDS Tuner(Regional Option f
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 4 • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 5 2 • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2 can also be connected to an additional video component such as a cable TV tuner or satellite system. • There are (composite) VIDEO jacks for analog video connections and the HDMI connectors for digital video and audio connections.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 6 ■HDMI (High Definition Multimedia Interface) connection : (*) • You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. • The HDMI connection can carry uncompressed digital video signals and digital audio signals. • The HDMI video stream signals (video signals) are theoretically compatible with DVI-D.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 7 • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to CD, VIDEO 1 and VIDEO 2 of this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc. • For details, refer to the operating instructions of the component connected.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 8 ENGLISH 7. CONNECTING SPEAKERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to "Speaker placement" on page 9.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 9 Speaker placement ENGLISH Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : ■Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 10 Front Panel Controls ENGLISH 1 2 3 4 NETWORK AV RECEIVER 11 7 6 5 8 RD-606i MASTER VOLUME STANDBY SOUND INPUT POWER ON / STANDBY ON STEREO SURROUND AUDIO VIDEO OFF PHONES 9 AUTO / MANUAL VIDEO 3 USB 5V AUX 1 AUX 2 SPEAKER AUDIO ASSIGN ON / OFF RETURN TONE CH.LEVEL SETUP ENTER / MEMO TUNE PRESET BAND 21 22 1A VIDEO L AUDIO R MAIN MENU 10 12 13 14 15 16 17 18 19 1. POWER switch 2. STANDBY indicator 3.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 11 ■AUX 1, 2 IN JACKS ■ Note : • When connecting these jacks to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord. AUX 1 AUX 2 ■USB CONNETOR VIDEO 3 USB 5V • An USB memory device can be connected to the USB connector to listen to MP3 or WMA files stored on it through this unit. (For details, refer to “When selecting “USB”” on page 30.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 12 ENGLISH Remote Controls SELECT CURSOR CONTROL( , , , ), ENTER buttons The functions in “< >” are regional option for Europe, etc. NETWORK CONTROL(NETWORK, PAUSE( ), PLAY( ), STOP( ), REPEAT( ), SHUFFLE( ), BACKWARD SKIP( ), FORWARD SKIP( )) buttons ■ Note : • The RATING( ) button is not available for this receiver.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 13 NETWORK AV RECEIVER ENGLISH REMOTE CONTROL OPERATION RANGE RD-606i MASTER VOLUME STANDBY SOUND INPUT POWER ON / STANDBY ON AUTO / MANUAL SURROUND STEREO VIDEO AUDIO OFF PHONES VIDEO 3 USB 5V AUX 1 AUX 2 SPEAKER AUDIO ASSIGN ON / OFF RETURN TONE CH.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 14 Operations ENGLISH ■Note : Before operating this receiver, first set this unit as desired for optimum performance, doing the system setup procedures. (For details, refer to "System Setup" on page 37.) LISTENING TO A PROGRAM SOURCE • Each time the “VIDEO” button on the front panel is pressed, the input source changes as follows: → VIDEO 1 →VIDEO 2 → VIDEO 3 Before operation • Enter the standby mode. POWER • The STANDBY indicator lights up.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 15 5. Operate the selected component for playback. Adjusting the tone (bass and treble) 9. Enter the tone mode. • When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 17. 6. ENGLISH TONE Adjust the (overall) volume. MASTER VOLUME • The tone mode is displayed for several seconds. DOWN UP - 30 TO N E : O F F FM 8 7 . 5 0 MH z P 0 1 10.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 16 SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. ENGLISH Surround modes ■DTS Digital Surround DTS Digital Surround(also called simply DTS) supports up to 5.1 discrete channels and uses less compression for high fidelity reproduction. Use it with DVDs and CDs bearing the DTS logo.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 17 ENJOYING SURROUND SOUND ■Note: Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. (For details, refer to "SETTING THE SPEAKER SETUP" on page 42.) • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be ("AT(Auto)" indicator automatically selected depending on the signal lights up.) format being input.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 18 When adjusting the sound parameters ENGLISH • While playing digital signals form Dolby Digital program source or listening in Dolby Pro Logic II Music mode, you can adjust their parameters for optimum surround effects. 1. Press the SOUND PARAMETER button. 3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired. TUNE • Then “DRC: ~” (or “PANORAMA : ~ ”) is displayed for several seconds.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 19 Adjusting each channel level with test tone 1. Enter the test tone mode. 2. At each channel, adjust the level as desired until the sound level of each speaker is heard to be equally loud.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 20 ENGLISH Adjusting the current channel level • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("CAL"), not into preset memory("REF 1", "REF 2"). 3. Adjust the level of the selected channel as 1. Press the CHANNEL LEVEL button. desired.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 21 • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. 1. Press the CHANNEL LEVEL button. 1. After performing the steps 1 ~ 4 in "Adjusting the CH.LEVEL current channel level" procedure on page 20, press the ENTER(/MEMORY) button. ENTER/MEMO • "CAL " (or "REF 1", etc.) is displayed for several seconds.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 22 LISTENING TO RADIO BROADCASTS ENGLISH Auto tuning Manual tuning • Manual tuning is useful when you already know the frequency of the desired station. • After selecting the desired band, press the TUNING UP(+) / DOWN(-) buttons repeatedly until the right frequency has been reached. 1. Select the desired band. BAND TUNE AT - 26 AU T O S URR FM 8 7 .
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 23 Manual presetting Tuning to preset stations • You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the desired preset number. ENGLISH 1. Tune in the desired station with auto or manual tuning. PRESET 2. Press the ENTER(/MEMORY) button. ENTER/MEMO • When using the NUMERIC buttons on the remote control. Examples: For “3” : AT 26 AU T O S URR FM 8 9 .
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 24 RDS Tuner (Regional Option for some countries in Europe, etc.) ENGLISH LISTENING TO RDS BROADCASTS(FM ONLY) RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following information. Program Service name (PS), A list of Program Types (PTY), Radio Text (RT).
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 25 Displaying RDS information ENGLISH In the FM mode, • Each time this button is pressed, the display mode changes as follows: → Surround mode → Radio Text (RT) Signal input ← Program → Service name (PS) Program Type (PTY) ← * Program Service Name(PS)-The name of the radio station. * Program Type(PTY)-This indicates the kind of program currently being broadcast. * Radio Text(RT)-Messages sent by the radio station.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 26 LISTENING TO INTERNET RADIO BROADCASTS, MUSIC FILES ENGLISH • You can listen to Internet radio broadcasts or music files stored on a USB memory device or a computer (media server). ■Internet Radio • Internet radio refers to radio broadcasts distributed over the internet. Internet radio stations from around the world can be tuned in by accessing Shoutcast website.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 27 4. Select the desired item, then press the ENTER Basic Operation button. 1. Make the necessary preparations. ENTER/MEMO ENGLISH PRESET ① Check the network environment, then turn on this unit. (See “CONNECTING TO NETWORK” on page 7.) ② If settings are required, make the network settings, etc. (See “When selecting “Settings”” on page 32.) ③ If the computer is used as a media server, prepare the computer. Install Windows Media Player ver.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 28 ◆To play repeatedly During playback of the desired music file, press the REPEAT( ) button. ) button. ENGLISH ◆To pause playback During playback, press the PAUSE( • Then “ ” lights up and the music files on the folder are played repeatedly. • To cancel the repeat playback, press this button again. • Then the playback will be stopped at the point where this button is pressed. • To resume playback from this point, press the PLAY(▶) button.
When selecting “Now Playing” When selecting “Internet Radio” • You can display the information on the Internet radio broadcast or music file being played. • You can listen to Internet radio broadcasts provided by Shoutcast. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired display mode. 1. Press the ENTER button.
ENGLISH RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 30 When selecting “USB” When selecting “DLNA” • You can listen to music files stored on a USB memory device. ■Note : • Before selecting “USB”, connect the USB memory device to the USB connector on the front panel. • You can listen to music files stored on a computer(media server) connected to this unit via your home network. ■Note : • To play music files stored on your computer, you should configure the Windows Media Player ver 11.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 31 ■Configuring the Windows Media Player ver. 11. 1. Run the Windows Media Player ver. 11 on your • You can listen to Internet radio stations or music files registered in the “Favorites” list or delete them. ■Note : • When the USB memory device is disconnected or your computer (media server) is turned off, the music files stored on them cannot be played. computer. 2. Select “Library” tab in the menu bar, and then select “Media Sharing”. 1.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 32 ◆When selecting “Modes” ENGLISH When selecting “Settings” 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to • When listening to Internet radio broadcasts or music files for the first time, first make settings for network, etc. for optimum performance. select “DHCP” or “STATIC”, then press the ENTER button. 1. Select the desired item, then press the ENTER • If your router’s DHCP server is enabled, you can select “DHCP”.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 33 ◆When selecting “Factory Settings” ⑦ Press the AUDIO ASSIGN(/RETURN) button to return to previous status. to select “OK” or “CANCEL”, then press the ENTER button. AUDIO ASSIGN RETURN • When “OK” is selected, they are reset to the factory default. • When “CANCEL” is selected, then the previous status is returned to without resetting.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 34 ENGLISH RECORDING • The digital signals from the “NET/USB”, coaxial, optical digital input or HDMI IN can be heard but cannot be recorded. • When recording the analog signals from CD, VIDEO 1~2, be sure to select the analog input. (For details, refer to "When CD, VIDEO 1~2 is selected as an input source" on page 14.) • The volume and tone (bass, treble) settings have no effect on the recording signals.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 35 OTHER FUNCTIONS • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90 → OFF Unit : minutes • While operating the sleep timer, " " lights up.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 36 CONFIRMING THE HDMI FUNCTION ENGLISH To use the HDMI control functions properly, it is recommend to confirm the HDMI control functions usable with each connected component by performing the following operations. ■Note : • Some HDMI control functions may not work with certain components and TV that are not compatible with them. Before operation • Check that this receiver, TV and player, etc are connected by HDMI cabels.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 37 • The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The setup menu consists of 6 main menus ; system, input, speaker, CH level, parameter and HDMI. These menus are then divided up into various sub-menus.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 38 ■Setup menu flow • The setup menu flow is as follows : SYSTEM SETUP SW MODE : NORM / SW + TONE : OFF / ON BASS : 0 dB / - 10 ~ + 10 ENGLISH A.P.S : OFF / 2HOUR / 4HOUR / 6HOUR TREBLE : 0 dB / - 10 ~ + 10 RETURN INPUT SETUP VIDEO 1 CONFIG D.IN : OPT / COX 1 / COX 2 / - - AUTO : ON / OFF RETURN VIDEO 2 CONFIG D.IN : OPT / COX 1 / COX 2 / - - AUTO : ON / OFF RETURN CD CONFIG D.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 39 SETTING THE SYSTEM SETUP SW MODE : NORM / SW + TONE : OFF / ON A.P.S : OFF / 2HOUR / 4HOUR / 6HOUR BASS : 0 dB / - 10 ~ + 10 TREBLE : 0 dB / - 10 ~ + 10 RETURN • SW(SUBWOOFER) MODE : To select the desired subwoofer mode. • TONE : To adjust the tone (bass and treble) as desired. • A.P.S(AUTO POWER SAVE) : To set the power-off time as desired. • RETURN : To return to the previous menu. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons 2.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 40 When selecting the TONE ENGLISH OFF : To listen to a program source without the tone effect. ("DIR" lights up.) ↕ ON : To adjust the tone for your taste. ("DIR" goes off.) ■When the TONE is set to ON to adjust the tone (bass and treble) ① Press the ENTER button to enter the tone setting mode. ② Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 41 SETTING THE INPUT SETUP INPUT SETUP VIDEO 1 CONFIG D.IN : OPT / COX 1 / COX 2 / - - - RETURN VIDEO 2 CONFIG D.IN : OPT / COX 1 / COX 2 / - - AUTO : ON / OFF RETURN CD CONFIG D.IN : OPT / COX 1 / COX 2 / - - - RETURN AUTO : ON / OFF RETURN • D.IN(DIGITAL IN) : To assign the connected DIGITAL INs to the desired input. • AUTO(AUTO SURROUND) : To select the auto surround mode or the manual surround mode.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 42 ENGLISH SETTING THE SPEAKER SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 43 ENGLISH 3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired. • Depending on your speaker type, you can select one of these following speaker types. • Front, Center and Surround speakers : LARGE : Select this when connecting speakers that can fully reproduce sounds below crossover frequency. SMALL : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 44 When selecting the CROSSOVER ENGLISH • When speakers are set to "SMALL", be sure to set their crossover frequency correctly according to their frequency characteristics. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "CROSSOVER", then press the ENTER button. AT CR OS S O V E R Fc : 80 30 2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the crossover frequency as desired.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 45 When selecting the SPEAKER DISTANCE 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “SPK DISTANCE”, then press the ENTER ENGLISH button. AT SPK D I S T AN C E 3 0 U N I T : M E T ERS 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item. ■Note : • You cannot select the speakers set to "NO". 3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 46 SETTING THE CH LEVEL SETUP CH LVL SETUP MODE : CAL / REF 1 / REF 2 LEFT : 0 dB / -15 ~ + 15 ENGLISH CENTER : 0 dB / -15 ~ + 15 RIGHT : 0 dB / -15 ~ + 15 SURR R : 0 dB / -15 ~ + 15 SURR L : 0 dB / -15 ~ + 15 SUBW : 0 dB / -15 ~ + 15 DD : 0 dB / -10 ~ 0 DTS : 0 dB / -10 ~ 0 RETURN ■Note : Depending on the speaker settings ("NO", etc), some channels cannot be selected.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 47 • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "MODE ~ ". 1. After performing the steps 1 ~ 3 in "Adjusting the current channel level" procedure on page 46, press the ENTER button. AT CH L V L S E T U P 3 0 MO D E : CA L AT • "CAL" may be displayed instead of "REF 1" or "REF 2".
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 48 SETTING THE PARAMETER SETUP ENGLISH PARAMTER SETUP PANORAMA : OFF / ON C.WIDTH : 3 / 0 ~ 7 DIMENSION : 0 / -3 ~ +3 DRC DD DRC : OFF / MID / MAX RETURN RETURN • DOLBY PRO LOGIC II MUSIC PARAMETERS : To adjust the various Dolby Pro Logic II Music parameters for optimum (PANORAMA, C.WIDTH(CENTER WIDTH), surround effect.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 49 • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track (with extremely high volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track when watching movies at night at low levels. ■Notes: • This setting is valid only when the digital signals from the Dolby Digital program source are being input.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 50 SETTING THE HDMI SETUP HDMI SETUP HDMI : AMP / THROUGH CEC : OFF / ON ENGLISH POWER : OFF / ON RETURN • HDMI(HDMI AUDIO OUT) : To output the digital audio signals from the HDMI MONITOR OUT connector. • CEC(HDMI CONTROL) : To link operations with components connected to HDMI connectors and compatible with HDMI control. • POWER(POWER CONTROL) : To link the power ON/OFF status of this unit to components.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 51 • The power control function allows the power status of this unit to be interlocked with the power ON/OFF and start of playback of the connected components. OFF : Not to use the POWER CONTROL function. ↕ ON : To use the POWER CONTROL function. ■Note: • The POWER CONTROL can be set only when the HDMI CONTROL is set to ON.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 52 ENGLISH Troubleshooting Guide If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.
RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 53 ■ AMPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 0.7%, 40 Hz~20 kHz | 2x100 W • Total harmonic distortion, 6 Ω, 100 W, 1 kHz | 0.05 % • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 100 W | 0.
606i(G) cover_cover.