Sherwood OPERATING iNSTRUCTiONS INSTRUCCIONES DE FUNCIONAMIENTO MODE D'EMPLOI RD-6504 AUDIONIDEO RECEPTOR RECEIVER DE A UDiONIDEO RECEPTEUR A UDIONIDEO
iMPORTANT SAFETY iNSTRUCTiONS 1. 2. 3. 4. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
Introduction READ THIS BEFORE OPERATING YOUR UNiT ///_ CAUTION :TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. uninsulated "dangerous voltage" within the product's This symbolthat is may intended alert the magnitude user to the topresence enclosure be oftosufficient constituteof a risk of electric shock to persons.
CONTENTS ,iMPORTANT SAFETY iNSTRUCTiONS ............................................................................................................................... 2 Introduction o READ THiS BEFORE OPERATING System Connections Controls 3 ......................................................................................................................................................... 5 Front Panel Controls Remote YOUR UNiT .................................................................
System Connections o Please be certain that this unit is unplugged from the AC outlet before making any connections. o Since different components often have different terminal names, carefully read the operating instructions of the component connected. o Be sure to observe the color coding when connecting audio, video and speaker cords. o Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. 3 4 2 8 / p, __ ........
2, /! CONNECTING VIDEO COMPONENTS o The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. o The jacks of VIDEO 2 can also be connected to an additional video component such as a cable TV tuner or satellite system.
Continued mHDMI (High Definition Multimedia interface) connection : (-k) . You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. * The HDMI connection can carry uncompressed digital video signals and digital audio signals. * The HDMI video stream signals (video signals) are theoretically compatible with DVI-D. When connecting to a TV monitor, etc.
I RD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03 _tlolml 8 _---_ o Use these jacks to connect the corresponding analog outputs of 6 CH decoder or DVD player with 6 CH output for Dolby Digital or DTS, etc. (For details, see the operator's manual of the component to be connected.) CENTER ,@ i l Decoder with 6 channel outputs 5, CONNECTING DIGITAL INs .
I RD-6504(A)_ENG:RD-6504(A) _, 2009-02-12 CONNECTING o To emphasize subwoofer. £ 9:03 SUBWOOFER _tlolml 9 _---_ PRE OUT the deep bass sounds, connect a powered Powered subwoofer . 7. CONNECTING ,/J SPEAKERS o Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+ and -).
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 2 9:03_tlolml 10 Speaker _t placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc, The typical example of speaker placement and recommendations are as follows : /! IIFront _ left and right speakers and center / ................................................................ speaker . Place the front speakers with their front surfaces as flush with TV or monitor screen as possible. .
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03qolJq 11 --_---_ Front Pane! Controls 10 13 32 4 56 7 8 9 / L 11 121415 16 1. POWER switch 17 18 19 20 21 10. MULTI CONTROL 2. POWER ON/STANDBY button 11. HEADPHONE 22 knob (4/_) jack 23 24 25 19. CHANNEL LEVEL button 20. CONTROL UP/DOWN 3. STANDBY indicator 12. SPEAKER button/indicator 4. FLUORESCENT 13. REMOTE SENSOR 21. MEMORY/ENTER 14. SURROUND 22. TUNING UP/DOWN DISPLAY For details, see below. MODE button 5.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 12 /! FAUX _ 81uetoott_ ........ IN ........ otc OUT mBluetooth i IN CONNECTOR o If the Bluetooth IN connector is connected to Sherwood Audio Receiver BT-R7(sold separately) with Bluetooth wireless technology, you can enjoy music wirelessly with a music player featuring Bluetooth wireless technology such as MP3 player, mobile phone, etc.. (For information on Sherwood Audio Receiver BT-R7, contact your dealer.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 13 _ Remote Controls r_POWER ON STANDBY POWER ON button STANDBY button TUNING UP/DOWN(+/-) buttons PRESET UP/DOWN(+/-) buttons NUMERIC(0~9) buttons ~ ~ _ ICB CC_ CBi s but,oo H CHATNNNELE LI_EoDEL bb:itt:_ TESTTONE button MUTE button II ............ " _ II O © ® @ II _ "" .......
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 2 9:03_tlolml 14 REMOTE CONTROL OPERATION © © © © © © _t_,_ RANGE © o Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERIES 1= Remove the cover. 2 = Load two batteries ("AAA" size, 1.5 V) matching the polarity. o Remove the batteries when they are not used for a long time. o Do not use the rechargeable batteries (Ni-Cd type).
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03qolml 15 _t _ Operations IINote : Before operating this receiver, first set this unit as desired for optimum performance, procedures. (For details, refer to "System Setup" on page 29.) _ LISTEN|NG TO A PROGRAM SOURCE doing the system setup j Before operation o Enter the standby mode. POWER 3. Select the desired input source. 0 o The STANDBY indicator lights up.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 16 _ When CD, VIDEO 1~ 2 is selected as an input source 4= Select the digital or the analog input connected as 7= To mute the sound. desired. /! O/A MOD or . Each time this button is pressed, the corresponding is selected as follows: r I. input , "MUTE" will flicker. , To resume the previous sound level, press it again.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 17 _ IlWhen the TONE is set to ON to adjust the tone (bass and treble). Adjusting the tone (bass and treble) 9= Enter the tone mode, 4 4 /h Press the CURSOR UP(A)/DOWN(T) select the desired tone. buttons to E23 E23 o Each time these buttons are pressed, the tone is selected as follows • %..'( _:,=.. i-_ BASS _ TRBL(treble)_ TONE: ON_ I o The tone mode is displayed for several seconds.
I RD-6504(A)_ENG:RD-6504(A) 2009-02-12 SURROUND £ 9:03 _tlolJ
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 19 ENJOYING SURROUND _t _ SOUND []Notes: o Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. details, refer to "SETTING THE SPEAKER SETUP" on page 34.) o When the EXTERNAL IN is selected as an input source, the surround modes cannot be selected.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 20 _ Listening in Virtual Surround Headphone mode /! o The Virtual Surround Headphone mode simulates 5.1 channel surround, which allows you to enjoy 5.1 channel surround sound through 2 channel hedphones, just like listening from 5.1 channel speakers. []Note : o Only when the SPEAKER button is set to off, the Virtual Surround Headphone mode can be selected. o Select the Virtual Surround Headphone mode.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 21 _ continued []When selecting the "PANO (Panorama)" mode This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" imaging. Select "OFF" or "ON"(default value: OFF). effect with side wall []When selecting the "C.
I RD 6504(A)_ENG:RD 6504(A) 20090212 £ 9:03 qolml 22 _ Adjusting the current channel level /! o After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit you r tastes. o You can adjust the current channel levels as desired. These adjusted levels are just memorized into user's memory ("CAL"), not into preset memory("REF 1 ", "REF 2"). 1, Press the CHANNEL LEVEL button. :w., _ or t { . L_ .%. --.
I RD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03 _tlolml 23 _ Memorizing the adjusted channel Jevels o You can memorize the adjusted channel levels into preset memorYCREF 1 .... REF 2") and recall the memorized want. whenever you 1. After performing the steps 1 - 4 in "Adjusting the current channel level" procedure on page 22, press the (MEMORY/)ENTER button. MEMO/ENTER ...... \ T..'GO'-C_ I / s _ I or o Then "1" of "REF 1" indication flickers for several seconds.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 24 LISTENING Auto /! TO PJ_DIO BROADCASTS _ 1 tuning 1= Select the desired band. Manual tuning o Manual tuning is useful when you already know the frequency of the desired station. o After selecting the desired band, press the TUNING UP(+) / DOWN(-) buttons repeatedly until the right frequency has been reached.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolxl Manual 25 --_---_ presetting Tuning . You can store up to 30 preferred stations in the memory. 1= Tune in the desired station to preset stations * After selecting the tuner as an input source, select the desired preset number. with auto or manual tuning. -- 2. Press the (MEMORY/)ENTER I button. II I PRESET -- or MEMO/ENTER . When using the NUMERIC buttons on the remote control.
I RD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03 qolml 26 _ 1 ECORDING o The analog signals from the EXTERNAL can be heard but cannot be recorded, INs as well as the digital signals from the coaxial, optical digital input or HDMI IN oWhen recording the analog signals from CD, VIDEO 1 ~ 2, be sure to select th analog input, (For details, refer to "When CD, VIDEO 1 ~ 2 is selected as an input source" on page 16,) o The volume and tone (bass, treble) settings have no effect on the recording signals, /!
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 27 Dubbing --_----_ the audio and video signals separately onto VIDEO 1 Example) When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1. 1, Select VIDEO 2 as a video recording source. 2, Select CD as an audio recording source. AUDIO © or 3, Start recording on the VIDEO 1. 4, Start play on the VIDEO 2 and the CD respectively.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 28 _t _ I OTHER FUNCTIONS Operating /! the sleep timer o The sleep timer allows the system to continue to operate for a specified period of time before automatically o To set the receiver to automatically turn off after the specified period of time. shutting off. o Each time this button is pressed, the sleep time changes as follows: 10_20_30 .... _90_OFF-] Unit : minutes / o While operating the sleep timer, " *]t " lights up.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_flolml 29 _ System Setup oThe setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The setup menu consists of 5 main menus ; system, input, speaker setup, CH level and parameter. These menus are then divided up into various sub-menus.
I RD-6504(A)_ENG:RD-6504(A) []Setup • The menu setup 2009-02-12 £ _.tlo1_:1 30 9:03 _*:, flow menu flow is as follows : if /! TONE: HDMI: / SW + / ON :De,_o,t _ott,ogs / ON TRBL BASS_o // -12-+12 .2-+12 RETURN RETURN • INPUT VID I CFG _ // AUTO COX1 / COX2 / HDMI / ANL / HDMI ANL / ANL / ON RETURN -- VID2CFG D.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlo1_:131 _ SETT|NG 0 SYSTEM J THE SYSTEM sw: / sw+ TONE: / ON HDMI: // ON t --BASS O / -12-+12 -- / [ RETURN " , , , _e _ TRBL :0 =12~+12 RETURN SW (SUBWOOFER) : To select the desired subwoofer mode. TONE : To adjust the tone (bass and treble) as desired. HDMI : To output the digital audio signals from the HDMI MONITOR OUT connector. RETURN : To return to the previous menu.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolxl 32 _ When selecting the TONE OFF : To listen to a program source without the tone effect. ("DIR" indicator lights up.) /! ON : To adjust the tone for your taste. ("DIR" indicator goes off.) [] Note : * When the EXTERNAL IN is selected as an input source, the TONE cannot be set to ON. •When the TONE is set to ON to adjust the tone (bass and treble) (1] Press the ENTER button to enter the tone adjustment.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 33 i I SETTING THE INPUT • INPUT _ VlD 1 CFG ANL L AUTO: D.IN::O_ // ON COX1 / / / COX2 / HDMI*/ / HDMI*/ / ANL RETURN VID 2 CFG -[ L D.IN : OPT AUTO:_:F : / COX1 ON RETURN m m COX2 RETURN CD CFG L ANL AUTO :_N D.IN: OPT RETURN /i,/ ON • : The HDMI audio input can be selected on the VIDEO 1 or VIDEO 2 configuration menu only. o D.
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 34 _ When selecting the DIGITAL IN /! o You should assign the connected DIGITAL INs to the desired of CD and VIDEO 1 ~ VIDEO 2. (For details, refer to "CONNECTING DIGITAL INs" on page 8.) o You can select the desired of OPT (optical), COX 1(coaxial 1), COX 2(coaxial 2) (, HDMI) and ANL (analog).
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolJ
IRD-6504(A)_ENG:RD-6504(A) 2009-02-12 £ 9:03_tlolml 36 When selecting _t _ the DISTANCE 1, Press the CURSOR UP(A)/DOWN(v) /! buttons to select the DISTANCE, then press the ENTER button. E]E][_ 2, Press the CURSOR UP(A)/DOWN(v) :..... i-_ a. buttons to select the desired speaker. []Note : o You cannot select the speakers set to "N (None)". 3, Press the CURSOR LEFT(_t)/RIGHT(I_) buttons to set the selected speaker as desired.
When selecting the CROSSOVER ° When speakers are set to "S (Small)", be sure to set their crossover frequency correctly according to their frequency characteristics. 1. Press the CURSOR UP(A)/DOWN(v) buttons to select the "X-OVER", FIFI 2 • Press the CURSOR LEFT( _)/RIGHT( then press the ENTER button. .......... _, ) buttons to set the crossover frequency as desired. . You can adjust the crossover frequency within the range of 40 ~ 200 Hz in 10 Hz intervals. mAhout the crossover frequency .
ETTING THE CH LEVEL 0 CH LEVEL MODE :CAL / REF 2 !1 FL C FR - SR SL !0 dB /-15~+15 L FL #_dB/-_5-+_5 !5dB/-15~+12 _:_B/-15~+15 F FL :4 dB /-15~+15 -- C - C i(_ dB /-t5 - FR '_dB/-15_+15 - SR _odB/-15 _ +12 _0 dB /-15 ~ +15 dB / -10 ~ 0 ' - DTS_ _B/-10~o : Depending SL ~ +15 :Q_dB /-15 ~ +15 SW ;_ dB /-15~+15 SW 0_dB /-15~+15 DD :_ dB /'10-0 DO _O_dB /-10-0 -- DTS ;!_ dB /-10~0 - RETURN - RETURN INote /'15_+15 - FR !e_B/-_s-+15 - SR _dB /-15-+15 - sL _B/-_-+15 SW _: dB /-1
Memorizing the adjusted channel levels , You can memorize the adjusted channel levels into preset memory("REF you want. 1.... REF 2") and recall the memorized whenever 1, After performing the steps 1 - 3 in "Adjusting the current channel level" procedure on page 38, press the ENTER button. i_ _W_ ¸ / nnC> \ . Then "1" of "REF 1" indication flickers. 2, Press the CURSOR LEFT(_t)/RIGHT(t_) ENTER button.
I SETTING • THE PARAMETER PARAMTR /! NIGHT M L RETURN PLII MSC "_ DRC RETURN / / 0.1 ~ 0.9 C.WIDTH :_/0 PANO DIMEN :: F_ / ON :_/=3~+3 MAX ~ 7 RETURN o NIGHT M (NIGHT MODE) : To adjust the dynamic range compression that makes faint sound easier to hear at low volume levels• o PLII MSC (DOLBY PLII MUSIC) : To adjust the various surround parameters for optimum surround effect• o RETURN : To return to the previous menu.
When selecting the DOLBY PLII MUSIC * You can adjust the various surround parameters for optimum surround effect. []Note: The parameter settings are valid only when listeningin Dolby Pro Logic NMusic mode. 1, Press the CURSOR UP(A)/DOWN(v) buttons to select the "PLH MSC", then press the ENTER ._....m- E]E]0 2, Press the CURSOR UP(A)/DOWN(v) ...... ,---z_..-.,:i ..,,--3. _m button. -.m --.: _-.-_-. buttons to select the desired parameter.
Troubleshooting Guide If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty. PROBLEM POSSIBLE CAUSE REMEDY No power * The AC input cord is disconnected.
Specifications [] AMPLIFIER SECTION o Power output, stereo mode, 6 _, THD 0.7%, 40 Hz~20 kHz ...................................................................................... 2x 100 W o Total harmonic distortion, 6 _, 100 W, 1 kHz ................................................................................................................. o Intermodulation distortion 0.03 % 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 _, 100 W ................................................................................
RD-6504 AUDIO/VIDEO RECEIVER RECEPTOR DE AUDIO/VIDEO RECEPTEUR AUDIO/VIDEO _Sherwood 5707-00000_199-0S
