Manual

IRD-6504(A)_ENG:RD-6504(A)2009-02-12£ 9:03_tlolml24 _
/!
LISTENING TO PJ_DIO BROADCASTS 1
Auto tuning
1= Select the desired band.
BAND
--I I
BAND FREQUENCY
oEach time this button is pressed, the band changes as
follows ;
F FMST _ FMMONO _ AM q
("ST" lights up) ("ST" goes off)
oWhen FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound.
2, Press the TUNING UP(+)/DOWN(-) buttons for
more than 0.5 second.
@ +
I II I or
-- TUNING --
TUNE
oThe tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNE".
oIf the station found is not the desired one, simply repeat
this operation.
oWeak stations are skipped during auto tuning.
Manual tuning
oManual tuning is useful when you already know the
frequency of the desired station.
oAfter selecting the desired band, press the TUNING
UP(+) / DOWN(-) buttons repeatedly until the right
frequency has been reached.
@ +
I II I
or
-- TUNING -- I _ _*_
I cb,*id;
Auto presetting
oAuto presetting function automatically searches for FM
stations only and stores them in the memory.
oWhile listening to FM radio broadcasts, press and hold
down the (MEMORY/) ENTER button for more than 2
seconds.
or
oThen "AUTO MEM" flickers and this receiver starts auto
presetting.
oTo stop auto presetting, press this button again.
oUp to 30 FM stations can be stored.
[] Notes:
oFM stations of weak strength cannot be memorized.
oTo memorize AM stations or weak stations, preform
"Manual presetting" procedure with using "Manual
tuning" operation.