Manual

IRD-6504(A)_ENG:RD-6504(A)2009-02-12£ 9:03_tlolml33 _
I SETTING THE INPUT
i
• INPUT VlD 1 CFG
m
m
L D.IN::O_ / COX1 / COX2 / HDMI*/
AUTO: / ON
RETURN
VID 2 CFG -[ D.IN : OPT / COX1
L
AUTO:_:F : / ON
RETURN
CD CFG L D.IN: OPT i,/
RETURN AUTO :_N / ON
RETURN
ANL
/ / HDMI*/ ANL
COX2 / ANL
• : The HDMI audio input can be selected on the VIDEO 1 or VIDEO 2 configuration menu only.
o D.IN (DIGITAL IN) : To assign the connected DIGITAL INs to the desired input,
oAUTO (AUTO SURROUND) : To select the auto surround mode or the manual surround mode,
o RETURN : To return to the previous menu,
IINote :
o In such a case that the HDMI IN is connected to your video component at the very first, the HDMI audio input is automatically
assigned to the input source (VIDEO 1 or VIDEO 2).
1, Press the CURSOR UP(A)/DOWN(v) buttons to select the desired input source, then press the ENTER
button.
cc: :t_J EZJJ
/
I_NN NI
Example) When selecting the CD
[]D/X,Iv2 "F "T_ ._- F- "-- i.,' "
.L( j. " '_" L L.-" z_ ..'
2, Press the CURSOR UP(A)/DOWN(v) buttons to select the desired item.
DD_
3. Press the CURSOR LEFT( _)/RIGHT(_,) buttons to set the selected item as desired.