Manual

IRD-6504(A)_ENG:RD-6504(A)2009-02-12£ 9:03_tlolml34 _

When selecting the DIGITAL IN

oYou should assign the connected DIGITAL INs to the desired of CD and VIDEO 1 ~ VIDEO 2.

(For details, refer to "CONNECTING DIGITAL INs" on page 8.)

oYou can select the desired of OPT (optical), COX 1(coaxial 1), COX 2(coaxial 2) (, HDMI) and ANL (analog).

[]Note :

oIn such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital

audio signals can be heard from the same DIGITAL IN.

When selecting the AUTO SURROUND

oDepending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.

OFF :You can select the desired of different surround modes selectable for the signal being input with

(Manual surround mode) using the MULTI CONTROL knob or the SURROUND MODE UP/DOWN (>/<) buttons.

$ (For details, refer to "ENJOYING SURROUND SOUND" on page 19.)

ON :The optimum surround mode will be automatically selected depending on the signal format being

(Auto surround mode) input.

[] Notes :

oWhen the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and can

select the surround mode as desired(the manual surround mode).

oWhen the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.

SETTIN6 THE SPEAKER SETUP /

oAfter you have installed this receiver and connected all the components, you should adjust the speaker settings for the

optimum sound acoustics according to your environment and speaker layout.

oEven when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the

speaker settings, too.

0 SPK SET CONFIG

DISTANCE

X=OVER

RETURN

FRONT :_ / S

CENTER :_ / S / N

SURR s / N

suB-w / N

RETURN

FL :_FT

-- C :_FT

m FR :_FT

-- S R : FT

SL :_FT

-- RETURN

/ 1~30

FC ::8_HZ / 40-200

RETURN

oCONFIG (CONFIGURATION) : To select the sizes of the speakers that are connected.

oDISTANCE: To enter the distance between the listening position and each speaker to set the delay time automatically for

optimum surround playback.

oX-OVER (CROSSOVER) : To select the desired crossover frequency.

oRETURN : To return to the previous menu.