Operating instructions
10
• ROOM 2 playback feature allows you to play a
different program source in another room as well as
one source in the main room at the same time.
• For ROOM 2 playback, connect the ROOM 2 OUT
jacks to the amplifier installed in another room, or
connect the ROOM 2 speaker terminals to the
speakers.
• To drive the speakers connected to the ROOM 2
speaker terminals, you should assign the power
amplifier to “ROOM 2”. (For details, refer to “When
selecting the AMP ASSIGN” on page 43.)
■Note :
• To minimize hum or noise, use high quality
connection cords.
8. CONNECTING ROOM 2 OUT JACKS OR ROOM 2 SPEAKER TERMINALS
• To connect this unit to a broadband home network wirelessly to listen to internet radio broadcast, connect the supplied 11N
Wireless USB adapter to the USB connector either on the rear panel or on the front panel.
• This unit is equipped with an IEEE802.11n(2.4 GHz band only) wireless module, which also supports the 802.11 b/g
standards.
■Notes :
• For safe opertaion, turn the power off before connecting or disconnecting the supplied 11N Wireless USB adapter.
• After making a broadband internet connection, you should set the communication settings.
(For details, see “When selecting “Network”” on page 36.)
• When using a broadband internet connection, a contract with an internet service provider is required.
For more information, contact your nearest internet service provider.
• Refer to the operating instructions of the equipment because the connected equipment and connection method may differ
depending on your internet environment.
9. CONNECTING TO NETWORK
RL
SURROUND BACK /
F. HEIGHT / ROOM 2 / BiAMP
(6 )
ROOM 2
RL
OUT
Another room(Room 2)
Router with
access point
USB
(WiFi)
5V / 1A
* An access point is a device that allows you to connect your home network wirelessly.
10. AC INPUT CORD
• Plug the cord into a wall AC outlet.
11. TERMINALS FOR UPGRADES
• These terminals may be used in the future to update the operating software so that it will be able to support new digital audio
formats, etc.
■Note :
• Programming for upgrades requires specialized programming knowledge and for that reason we recommend that it only be
done by qualified installers.
ENGLISH
RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:24페이지10