Operating instructions
ENGLISH
12
SETUP MIC
Microphone
• To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When
selecting the AUTO SETUP" on page 47.)
■Notes:
• Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than
the one supplied with this receiver.
• After you have completed the auto setup procedure, disconnect the microphone.
■SETUP MIC JACK
F.AUX
• The FRONT AUX IN jack can be connected to additional audio components such as an MP3 player, etc.
■Note :
• When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord.
■FRONT AUX IN JACK
USB
5V / 1A
VIDEO 4
VIDEO L AUDIO R
• An USB memory device can be connected to the USB connector either
on the front panel or on the rear panel to listen to MP3 or WMA files
stored on it through this unit. (For details, refer to “When selecting
“music library”” on page 32.)
■Note :
• After USB playback, remove the USB memory device in the stop mode
or the standby mode.
■USB CONNETOR
■VIDEO 4 IN JACKS
USB
5V / 1A
VIDEO 4
VIDEO L AUDIO R
• The VIDEO 4 IN jacks may be also connected to an additional video
component such as a camcorder, a video game player, etc.
USB memory device
RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:24페이지12