Operating instructions

• When using the NUMERIC buttons on the remote control.
Examples: For “3” :
For “15” :
For “30” :
Tuning to preset stations
PRESET
ENTER/MEMO
TUNE
PRESET
3. Select the desired preset number (1~30) and press the
ENTER(/MEMORY) button.
4. Repeat the above steps1 to 3 to memorize other
stations.
■MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
• When using the NUMERIC buttons on the remote control.
Examples : For “3” :
For “15” :
For “30” :
• The station has now been stored in the memory.
• When specifying a two digit number with using the NUMERIC
buttons, the station is stored automatically without pressing the
ENTER(/MEMORY) button.
• A stored frequency is erased from the memory by storing
another frequency in its place.
• After selecting the tuner as an input source, select the
desired preset number.
25
ENGLISH
Manual presetting
• You can store up to 30 preferred stations in the memory.
• The preset number flickers.
ENTER/MEMO
1. Tune in the desired station with auto or manual tuning.
2. Press the ENTER(/MEMORY) button.
AU S URR TO
FM MH
26
zP08 9.10
AT
RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:24페이지25