Operating instructions

39
Operating the sleep timer
• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
• To set the receiver to automatically turn off after the specified period of time.
Adjusting the brightness of the fluorescent display
OTHER FUNCTIONS
• Each time this button is pressed, the display mode
changes as follows:
• When the RDS tuner function is available in your country,
for details on the FM mode information, see “Displaying
RDS information” on page 27.
Displaying the operation status
Signal
input
OFF
(Normal display)
↔
• Each time this button is pressed, the sleep time changes
as follows:
→ 10 → 20 → 30 → --- → 90 → OFF
Unit : minutes
• While operating the sleep timer, " " lights up.
• When the sleep time is selected, the fluorescent display
is dimly lit.
• Each time this button is pressed, the brightness of
the fluorescent display changes as follows:
→ ON → dimmer → OFF
• In the display OFF mode, pressing some buttons
cancel the display OFF mode to display the operation
status.
During playback,
• Each time this button is pressed, the ROOM 2 MODE
changes as follows:
ON : To turn on the ROOM 2 function.(“R2” lights up.)
↕
OFF : To turn it off. (“R2” goes off.)
For details on ROOM 2 playback, refer to “SETTING THE
MULTI ROOM SETUP” on page 55.
■Notes :
• Even when this receiver enters the standby mode, in such
a case that “R2” lights up still, meaning only the ROOM 2
circuitry operates, the ROOM 2 source can be played
independently.
• When you do not use the ROOM 2 function, turn off the
ROOM 2 function to save electricity.
Playing ROOM 2 source
• The ROOM 2 function alllows enjoying one source in the
main room and playing another in a different room at the
same time.
ENGLISH
RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:25페이지39