Operating instructions

ENGLISH
42
AMP : SURR.BACK / FRONT HEIGHT / ROOM 2 / BI AMP
SW MODE : NORM / SW +
TONE : OFF / ON
RETURN
BASS : 0 dB / - 10 ~ + 10
TREBLE : 0 dB / - 10 ~ + 10
SPK / EQ SETUP
SYSTEM SETUP
INPUT SETUP
VIDEO 1 CONFIG
V2/iPOD CONFIG
VIDEO 3 CONFIG
VIDEO 4 CONFIG
CD CONFIG
AUX CONFIG
F.AUX CONFIG
RETURN
AUTO SETUP
ROOM EQ
SPK CONFIG
CROSSOVER
SPK DISTANCE
RETURN
MODE : CAL / REF 1 / REF 2
LEFT : 0 dB / -15 ~ + 15
CENTER : 0 dB / -15 ~ + 15
RIGHT : 0 dB / -15 ~ + 15
SURR R: 0 dB / -15 ~ + 15
SBACK R : 0 dB / -15 ~ + 15
SBACK L : 0 dB / -15 ~ + 15
SURR L : 0 dB / -15 ~ + 15
SUBW : 0 dB / -15 ~ + 15
DD : 0 dB / -10 ~ 0
DTS : 0 dB / -10 ~ 0
RETURN
ROOM 2 : OFF / ON
RETURN
DRC : OFF / MID / MAX
RETURN
DRC : AUTO / OFF / MID / MAX
RETURN
PANORAMA : OFF / ON
C.WIDTH : 3 / 0 ~ 7
DIMENSION : 0 / -3 ~ +3
DRC DD
DRC THD
H.GAIN : LOW / MID / HIGH
RETURN
IN : MAIN / TUNER / CD / AUX / F.AUX / VIDEO 1 / V2/iPOD / VIDEO 3 / VIDEO 4
VOL : 30 / MIN(0) ~ MAX(80)
RETURN
MULTI ROOM SET
PARAMTER SETUP
CH LVL SETUP
HDMI : AMP / THROUGH
CEC : OFF / ON
POWER : OFF / ON
RETURN
HDMI SETUP
EXIT
MODE : OFF / ON
RETURN
A.MODE : AUTO / HDMI / DIGITAL / ANALOG
D.IN* : OPT1 / OPT 2 / COX 1 / COX 2 / - - -
AUTO : ON / OFF
SYNC : 0 / 0 ~ 200
RETURN
Fc : 30 / 50 / 80 / 100 / 150 / 200
RETURN
UNIT : METERS / FEET
LEFT : 3.0 m / 0.1 ~ 9.0
CENTER : 3.0 m / 0.1 ~ 9.0
RIGHT : 3.0 m / 0.1 ~ 9.0
SURR R : 3.0 m / 0.1 ~ 9.0
SBACK R : 3.0 m / 0.1 ~ 9.0
SBACK L : 3.0 m / 0.1 ~ 9.0
SURR L : 3.0 m / 0.1 ~ 9.0
SUBW : 3.0 m / 0.1 ~ 9.0
RETURN
LEFT : 10.0 ft / 0.5 ~ 30.0
CENTER : 10.0 ft / 0.5 ~ 30.0
RIGHT : 10.0 ft / 0.5 ~ 30.0
SURR R : 10.0 ft / 0.5 ~ 30.0
SBACK R : 10.0 ft / 0.5 ~ 30.0
SBACK L : 10.0 ft / 0.5 ~ 30.0
SURR L : 10.0 ft / 0.5 ~ 30.0
SUBW : 10.0 ft / 0.5 ~ 30.0
RETURN
FRONT : LARGE / SMALL
CENTER : LARGE / SMALL / NO
SURR : LARGE / SMALL / NO
SURR B : L2 / L1 / S2 / S1 / NO
SUB-W : YES / NO
RETURN
■Setup menu flow
• The setup menu flow is as follows :
• When "RETURN" is selected on a sub-menu, it will return to the previous menu.
• When the AUDIO ASSIGN(/RETURN) button is pressed on a sub-menu, it will return to the previous menu, too.
■Note : During settup menu operation, only the (POWER ON/)STANDBY button and the buttons required for system setup
will function.
* : Default setting for AUDIO ASSIGN
varies depending on the input source.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:25페이지42