Operating instructions
ENGLISH
54
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset
memory("REF 1", "REF 2") and recall the memorized
whenever you want.
• Then "1" of "REF 1" indication flickers.
• Each time the CURSOR LEFT(◀) or RIGHT(▶) button is
pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.
• "CAL" may be displayed instead of "REF 1" or "REF 2".
• Then the channel levels memorized into the selected
preset memory are recalled.
Recalling the memorized channel levels
1. After performing the steps 1 ~ 3 in "Adjusting the
current channel level" procedure on page 53,
press the ENTER button.
2. Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired preset memory,
then press the ENTER button.
1. Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "MODE ~ ".
2. Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired one of REF 1 and
REF 2.
CH
L
LV
DE
ST
E
MR
UP
30
EF1O :
AT
CH
L
LV
DE
ST
E
MC
UP
30
ALO :
AT
RD-705i(G)_ENG_101206_RD-705i(G)_ENG2010-12-07오전10:25페이지54