User's Manual

6
AC OUTLET
230V~50Hz
SWITCHED
100W(0.43A) MAX.
AC INPUT
230V~50Hz
190W
PHONO CD TUNER
TAPE 1
/MD
IN OUT IN OUT
TAPE 2
MONITOR
DIGI LINK
SPEAKER A
SPEAKER B
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
WARNING : SHOCK HAZARD-DO NOT OPEN.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
GND
SN.
MODEL NO. AX-5103
INTEGRATED AMPLIFIER
ASSEMBLED IN CHINA
DESIGNED IN USA
CONNECTING SPEAKERS
Plug this cord into a wall AC outlet
AC INPUT CORD
• This outlet is switched on (power on
mode) and off (standby mode)
according to power control as follows;
(Maximum total capacity is 100 W
(0.43A))
Standby mode - switched AC outlet off
Power on mode - switched AC outlet on
• This amplifier enables you to listen to two pairs of speakers
individually or in various combinations.
Connect your main speakers to the SPEAKER A terminals and
use the SPEAKER B terminals for the remote pair located
elsewhere in your home.
• Never short circuit the + and - speaker cords.
• Be sure to connect speakers firmly and correctly according to the
channel (left and right) and the polarity (+ and -).
Note : For safe amplifier operation, use the speakers with
impedance of over 8Ω when you use either SPEAKER A or B
terminals and use the speakers with impedance of over 16Ω
when you use both SPEAKER A and B terminals.
SWITCHED AC OUTLET
ENGLISH
AX5103(G) 2007.8.17 4:43 PM 페이지 5