User's Manual

 BALANCE CONTROL KNOB
Adjust the stereo balance between left and right
speakers.
• The center position is the normal condition.
 TONE DIRECT SWITCH
Press this switch to bypass the tone (bass and treble)
circuitry for pure sound.
 LOUDNESS SWITCH
Press this switch to emphasize the sound of frequencies
that are difficult to hear at low volume levels.
• The frequency emphasis varies according to the volume
level at which you are listening.
 HEADPHONE JACK
Stereo headphones with a standard 1/4 inch plug can be
plugged into this jack for private listening.
• When listening with headphones, turn off both
SPEAKER SELECTOR A and B buttons.
 REMOTE SENSOR
This receives the signals from the system remote control
unit.
7
Front Panel Controls
 POWER SWITCH
Press this switch to enter the power off or the standby
mode.
 STANDBY INDICATOR
In the standby mode, this indicator lights up.
 SPEAKER SELECTOR A, B BUTTONS/
INDICATORS
Press the button to switch the desired speakers on
or off.
 INPUT SELECTOR BUTTONS/INDICATORS
Press the button to select the desired input source.
• When the TAPE 2 MONITOR indicator lights up, other
inputs cannot be heard from the speakers.
To listen to a input source other than TAPE 2 MONITOR,
be sure to set the TAPE 2 MONITOR button to off.
 VOLUME CONTROL KNOB
Adjust the volume to a comfortable listening level.
 BASS CONTROL KNOB
Adjust the low-frequency tone.
• The center position is the flat (normal) condition.
 TREBLE CONTROL KNOB
Adjust the high-frequency tone.
• The center position is the flat (normal) condition.
ENGLISH
AX5103(G) 2007.8.17 4:43 PM 페이지 6