User's Manual

8
DIGI LINK III System Remote Controls
• You can remotely control not only this amplifier but also Sherwood compatible components bearing the DIGI LINK II or III logo.
• For system remote control operation, first make the DIGI LINK connections.
• In the DIGI LINK III remote control system, if pressing PLAY, etc. on CD player or tape deck, CD or TAPE 2 MONITOR is
selected automatically without selecting the input source and then PLAY, etc. starts.
Notes :
• Some functions for CD player or tape deck may not be available.
• For details about functions, refer to the operating instructions of each component.
SPEAKER SELECTOR A, B
BUTTONS
POWER BUTTON
In the standby mode, press this button
to enter the operating or the standby mode.
NUMERIC BUTTONS
For selecting preset stations in tuner mode.
For selecting a track in CD mode.
SLEEP BUTTON
When the Sherwood components (including
tuner such as TX-5090C) are made
DIGI LINK III connections, the sleep timer of
Sherwood tuner allows the system to continue
operating for a specified period of time before
automatically shutting off.
Each time this button is pressed, the sleep
time on Sherwood tuner changes as follows;
When the sleep time is selected, all display
panels of the system are dimly lit.
CD PLAYER SECTION
- to pause play.
- to stop play or to clear a program.
- to begin play.
INPUT SELECTOR BUTTONS
PRESET SCAN BUTTON
For scanning preset stations in sequence
in tuner mode.
MUTE BUTTON
Press this button to temporarily mute
the sound.
Press again to resume the previous
sound level.
DIMMER BUTTON
Each time this button is pressed,
the brightness of all fluorescent displays of
Sherwood components connected by
the DIGI LINK III changes together
as follows;
TAPE DECK SECTION
VOLUME UP/DOWN (+/-) BUTTONS
DECK SELECTOR A, B - for selecting deck
A or B
, - to begin reverse or forward side
playback.
- to stop playback or recording.
ENGLISH
AX5103(G) 2007.8.17 4:43 PM 페이지 7