Home Theater Speaker System Operating Instructions

Troubleshooting Guide

Specifications

No Power

No sound

Distorted sound

Less bass and poor

imaging

・The AC input cord is disconnected.

・The POWER switch on the rear panel is

not pressed.

・Incorrect connection between the

components.

・Incorrect operation of the component

connected.

・The unit runs at excessively high volume

level.

・The PHASE switch is set to the opposite

position.

・Connect the cord securely.

・Turn the POWER knob to ON.

・Make connections correctly.

・Operate the component correctly.

・Decrease the volume level.

・Set the PHASE switch correctly.

PROBLEM POSSIBLE CAUSE REMEDY

■ASW-4108

•Frequency Response 45~300Hz

•Power, Impedence 4 75 W

•Sound Pressure Level 80dB/W/m

•Power Supply 120V/60Hz

•Power Consumption 75W

■ST-4108F/R

•RMS Power 35W

•Max Power 70W

•Impedence 6

•Power Pressure Level 86dB/W/m

■ST-4108C

•RMS Power 35W

•Max Power 70W

•Impedence 6

•Power Pressure Level 86dB/W/m

※Note : Specifications are subject to change without notice.

If this unit does not perform as expected, consult the table below to see if the problem can be corrected before

seeking help from your dealer or our service organization.