cover_ENG:cover 2009-03-05 오 4:49 페이지 1 R-972
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 2 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 3 Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 4 ENGLISH contents • IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 5 • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. 1.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 6 ENGLISH 2. CONNECTING VIDEO COMPONENTS • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2/VIDEO 3/VIDEO 4 can also be connected to an additional video component such as a cable TV tuner or satellite system. • Connect the jacks of VIDEO 3/VIDEO 4 to the video component in the same way.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 7 ■Notes : • For stable signal transfer, we recommend using HDMI cords that are a maximum of 5 meters in length. • Among the components that support HDMI, some components can control other components via the HDMI connector. However, this unit cannot be controlled by another component via the HDMI connector. • The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the component that is connected.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 8 Continued ■When Monitor Output is set to Component ENGLISH • The video signals are output from the COMPONENT MONITOR OUTs only depending on the Video Mode setting ■Note : . • The HDMI video signals cannot be output regardless of the Video Mode setting. ■When Monitor Output is set to SC-Video • The video signals are output from the (composite) VIDEO, the S-VIDEO and the COMPONENT MONITOR OUTs depending on the Video Mode setting. ■Note : .
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 9 3. CONNECTING AUDIO COMPONENTS ENGLISH • The TAPE IN/OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc. 4. CONNECTING ExTERNAL INS • Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 10 ENGLISH 5. CONNECTING DIGITAL INS AND OUT • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 11 7. CONNECTING SPEAkERS ENGLISH • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to "Speaker placement" on page 12.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 12 Continued ENGLISH ■Connecting speaker wire 1. Strip away approx. 10 mm (3/8 inch) of wire insulation, then twist the wire ends tight. 2. Loosen by turning the speaker terminal counterclockwise. 3. Insert the bare part of the wire. 4. Tighten by turning it clockwise. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 13 8. CONNECTING ROOM 2 AND ROOM 3 OUTS ■Connecting ROOM 2 OUTs • You can select a different source for ROOM 2 and can play it. • Depending on how to connect the ROOM 2 speakers, there are two ways as follows.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 14 ENGLISH 9. CONNECTING xM (only for North America) • Connect the XM terminal to the XM Mini-Tuner system (sold separately). • Position the XM Mini-Tuner system near a south-facing window to receive the best signal. When making connections, also refer to the operating instructions of the XM Mini-Tuner system.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 15 • The multi-room system kit(sold separately ) is essential for operation from a remote location . For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com. • IR IN jack allows you to control this receiver from other room(Room 2 and Room 3) with the remote control unit.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 16 ENGLISH 14. CONNECTING PC FOR UPGRADES • This receiver incorporates RS-232C as well as USB terminal on the front panel that may be used in the future to update the operating software so that it will be able to support new digital audio formats, external control by using an external device and the like. • Connect either RS-232C or USB terminal to your PC (you don't need to do both).
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 17 ENGLISH Front Panel Controls • To open the panel door, push gently on the lower third of the panel door. 1. POWER switch 2. POWER ON/STANDBY button/indicator 3. SURROUND MODE button 4. STEREO button 5. REMASTERING button 6. PURE AUDIO button 7. VIDEO SELECTOR button 8. AUDIO SELECTOR button 9. EXTERNAL IN button 10. TUNER button 11. VIDEO SCALING indicator 12. PURE AUDIO indicator 13. MASTER VOLUME CONTROL knob 14. MULTI CONTROL knob 15.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 18 ENGLISH ■FLUORESCENT DISPLAY 1. Dolby surround mode indicators 2. Auto surround indicator 3. Speaker(/channel output : outer box) indicators 4. Input signal indicators 5. REMASTERING indicator 6. HDMI indicator 7. ROOM 2 amp indicators 8. ROOM-EQ indicator 9. Input, frequency, surround mode, operating information, etc. 10. DIGITAL INPUT indicator 11. TONE indicator 12. SLEEP indicator 13. CINEMA EQ indicator 14. STEREO indicator 15.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 19 This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc. • To operate 7 components other than this receiver , you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 22.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 20 ENGLISH ■FUNCTION TABLE of the NUMBERED BUTTONS. ■Notes : • Some functions for each component may not be available or may work differently. • Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too. • For details about functions, refer to the operating instructions of each component.
9:00 페이지 21 oPeRAtInG coMPonents WItH ReMote contRoL 1. Enter the setup code for each ReMote contRoL oPeRAtIon RAnGe ■In case that this remote control emits the infrared beams • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. component other than this receiver. For details, refer to "Entering a setup code" on page 22. 2. Turn on the component you want to operate. 3.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 22 ENGLISH UsInG FUnctIons oF ReMote contRoL • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 23 6. Operate the component using the corresponding 3. While "PRESET" is displayed, search a setup function buttons. code, aiming the remote control at the remote sensor on the component. ENGLISH • If any of buttons fails to operate as they should, start from the step 1 again to enter the correct setup code. ■Note : • Manufacturers may use different setup codes for the same product category.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 24 4. While "SEL" is flickering, on this remote control, ENGLISH Programming the commands from other remote controls (LEARNING mode) press the button corresponding to the function to be learned. • If the setup codes are not available for your component or you want to program a missing or special function into one button of a device, the learning function enables this remote control to learn the commands from other remote controls.
9:00 페이지 25 Erasing the programmed command from one button Erasing all the commands programmed under a device mode 1. Perform the steps 3 and 4 in "Entering a setup 1. Perform the steps 3 and 4 in "Entering a setup code" procedure on page 22 to select the deleting mode ("DELETE"). code" procedure on page 22 to select the deleting mode ("DELETE"). • Then "BTTN" is displayed on the LCD screen for several seconds. • Then "BTTN" is displayed on the LCD screen for several seconds. 2.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 26 ENGLISH Programming a macro function • The macro function enables you to program a series of button operations(up to 15) on this remote control into a single button. • You can store up to three separate macro command sequences into "M1", "M2" and "M3" buttons. 3. While "SEL" is flickering, press the operation buttons you want to program in order. Example: When playing a DVD on the DVD player connected to VIDEO 2 jacks of this receiver. ①.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 27 Operating a macro function • Aim the remote control at the REMOTE SENSORs of the components to be controlled and press the MACRO button you want. Example : When pressing "M1" button. UP(▲)/DOWN(▼) buttons to select the desired punch-through mode, then press the ENTER button. ■Notes: • The codes programmed into a MACRO button will be transmitted at an interval of 0.5 seconds. However, some components may not be able to complete one operation in 0.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 28 Continued Operating a punch-through function ENGLISH 3. While the device is displayed, press the • While this remote control is set to control a master device, aim the remote control at the REMOTE SENSOR of the punch-through device and press the desired button of the programmed punch-through controls. Example: When pressing "PLAY (▶)" button. CURSOR UP(▲)/DOWN(▼) buttons to select the desired punch-through device, then press the ENTER button.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 29 Continued 3. While the device is displayed, press the 2. While "VOL" is displayed, press the CURSOR UP(▲)/DOWN(▼) buttons to select the all punch-through deleting mode ("DELETE"). ENGLISH CURSOR UP(▲)/DOWN(▼) buttons to select the one punch-through deleting mode ("DELETE"), then press the ENTER button.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 30 3. While "RF" (or "IR") is displayed, press the ENGLISH Changing the transmission signal CURSOR UP(▲)/DOWN(▼) buttons to select the desired transmission signal, then press the ENTER button. • This remote control can emit not only the infrared beams which the conventional remote control uses but also the RF(Radio Frequency) beams which are stronger than those.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 31 This remote control unit is an additional remote control unit for the ROOM 2 source playback only. • You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit. • For details on ROOM 2 operation, refer to "Listening to ROOM 2 source" on page 54. REMOTE CONTROL OPERATION RANGE • Aim the ROOM 2 remote control at the IR receiver installed in other room.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 32 ENGLISH Operations ■Notes: • Before operating this receiver with the supplied remote control, refer to "Universal Remote Controls" on page 19 for details about operation. • Before operating this receiver, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to "OSD Menu Settings" on page 56.) LISTENING TO A PROGRAM SOURCE 3. Select the desired input source.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 33 4. Operate the selected component for playback. Achieving a more detailed sound reproduction ENGLISH • When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 39. 5. Adjust the (overall) volume. • The RE-MASTERING indicator lights up, the remastering processes the input signal digitally and converts its digital sampling frequency to twice the current frequency (88.2/96 kHz or 176.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 34 QUICk SETUP Assigning the HDMI INs ENGLISH • You can also make settings for input sources directly by using some buttons on the front panel without performing OSD menu setting procedures. • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 5. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6~8.) 1. Press the HDMI ASSIGN button.
9:00 페이지 35 Setting the AUDIO MODE Assigning the COMPONENT VIDEO INs • You should select the audio input signal to be played. • You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1 ~ VIDEO 5. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6~8.) ■Notes: • Be sure to set the AUDIO MODE to the audio input which is connected and assigned to the selected input source.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 36 ENGLISH Continued • Each time the MULTI CONTROL knob is rotated or the CURSOR LEFT(◀)/RIGHT(▶) buttons are pressed, the corresponding audio input mode is selected as follows : → AUTO : When there are multiple audio input signals, the audio input signals are detected and the audio input signal to be played is selected automatically in the priority of them : HDMI audio>DIGITAL audio>ANALOG audio HDMI : The signal that is input into the HDMI IN is ↕ alwa
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 37 sURRoUnD soUnD Surround modes ■DTS Digital Surround ■Dolby Digital DTS Digital Surround(also called simply DTS) supports up to 5.1 discrete channels and uses less compression for high fidelity reproduction. Use it with DVDs and CDs bearing the DTS logo. Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Discs bearing the Dolby Digital logo includes the recording of up to 5.1 channels of digital signals.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 38 ■Dolby Virtual Speaker • The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to high performance Digital Signal Processor to recreate sound fields artificially. Select one of the 7 provided surround modes according to the program source you want to play. ENGLISH This mode creates a virtual surround sound field using as few as two front speakers, allowing you to experience listening from 5.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 39 ■Notes: • Before surround playback, first perform the speaker setup procedure, etc. on the OSD menu for optimum performance. (For details, refer to "SETTING THE SPEAKER / LISTENING SETUP" on page 61.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 40 Continued Adjusting each channel level with test tone ■To cancel the surround mode for stereo operation ENGLISH • The volume level of each channel can be adjusted easily with the test tone function. ■Notes : • When the SPEAKER button is set to off, the test tone function does not work. • When EXTERNAL IN or USB is selected as an input source, the test tone function does not work.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 41 • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("TRIM"), not into preset memory("REF 1", "REF 2"). ■Note : • Only when the Trinnov Position is set to "None", you can adjust the channel levels, memorize and recall them.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:00 페이지 42 Recalling the memorized channel levels Memorizing the adjusted channel levels ENGLISH • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. 1. Press the CHANNEL LEVEL button. 1. After performing the steps 1~4 in "Adjusting the current channel level" procedure on page 41, press the ENTER(/MEMORY) button. • "REF 1" (or "TRIM") is displayed for several seconds.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 43 LISTENING TO RADIO BROADCASTS 1. Select the desired band. • Manual tuning is useful when you already know the frequency of the desired station. • After selecting the desired band, press the TUNING UP(+)/DOWN(-) buttons repeatedly until the right frequency has been reached. Auto presetting • Auto presetting function automatically searches for FM stations only and stores them in the memory.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 44 Manual presetting Tuning to preset stations ENGLISH • You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the desired preset number. 1. Tune in the desired station with auto or manual tuning. 2. Press the ENTER/MEMORY button. Scanning preset stations in sequence • "MEMORY" is flickering for several seconds. 3. Select the desired preset number (1~30) and press the ENTER/MEMORY button.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 45 XM Satellite Radio (only for North America) ■About xM Satellite Radio for U.S. & Canadian products XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 46 Channel search Category search • In the XM mode, press the TUNING UP (+)/DOWN (-) buttons repeatedly to select the desired channel. • Category search allows you to select the desired channel by the selected category. ENGLISH 1. In the XM mode, select the category search mode. Direct search • "CAT : ~ " is displayed. • Direct search is useful when you already know the channel number. 2.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 47 Displaying xM information • You can store up to 30 preferred channels in the memory. • You can display XM information such as channel name, artist name, song title and signal strength. 1. Select the desired channel with preforming ENGLISH Presetting channels • In the XM mode, channel search, direct search or category search. 2. To memorize the channels, perform the steps 2 to 4 in "Manual presetting" procedure on page 44.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 48 PLAYInG MUsIc FILes ENGLISH • When connecting a USB mass storage device to this unit, you can enjoy MP3 or WMA files stored on it through this receiver. ■MP3 • MP3 files must have a “.mp3” or “.MP3” file name extension. • It is recommended that you record your material at a 44.1kHz sampling rate, using the 96~320 kbps data transfer rate. • Fixed bit-rate files are recommended.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 49 ENGLISH 3. Start playback. Current file number Elapsed playing time of the file The type of the file 4. To interrupt playback temporarily. • To resume playback, press the " " button. 5. To stop playback. • Then playback of a file is stopped and the receiver memorizes that file where the " " button is pressed. (Resume function). • If the " " button is pressed, playback will resume from the beginning of that.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 50 Skipping ahead or back during playback ENGLISH • Each time the " " button is pressed, a file is skipped. • When the " " button is pressed once, playback returns to the beginning of that file. • When the " " button is pressed twice, a file is skipped. Repeat/Random playback • You can play a file, all the files repeatedly or files in random order. • During playback, press the SEARCH MODE button to select the desired playback mode.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 51 • The analog signals from the EXTERNAL INs as well as the digital signals from the USB IN, the HDMI IN, the OPTICAL or COAXIAL DIGITAL IN can be heard but cannot be recorded. • When recording the analog signals from CD, VIDEO 1~5, be sure to select "Analog" for the Audio Mode. (For details, refer to "When selecting the Audio Mode" on page 71.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 52 ENGLISH DIGITAL AUDIO RECORDING WITH MD RECORDER 2. For digital recording, select the digital input as • Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 53 Operating the sleep timer Adjusting the brightness of the fluorescent display • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 54 ENGLISH MULTI ROOM OPERATION • In addition to your main room, you can also enjoy playback in two other rooms (ROOM 2 and ROOM 3). ■Notes: • The analog signals from the EXTERNAL INs and the digital signals (including signals from the USB IN) cannot be output to the other rooms, meaning no playback in ROOM 2 and ROOM 3. • The HDMI video signals and the component video signals cannot be output to the other rooms.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 55 Continued ◆When using the buttons on the front panel ■When selecting the ROOM 2 volume. • You can adjust the ROOM 2 volume. 1. Press the ROOM 2 button to enter the ROOM 2 • The tone level can be adjusted within the range of -10 ~ +10 dB. • In general, we recommend the bass and treble to be adjusted to 0 dB (flat level). • Extreme settings at high volume may damage your speakers. • ROOM 2 ~ is displayed for several seconds.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 56 ENGLISH OSD Menu Settings • The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 57 3. Confirm your selection. 58 ■When selecting the Speaker/Listening Setup ■When selecting the Input Setup AUTO SETUP Optimizer 69 61 ■When selecting the Sound Parameter ■When selecting the Multi Room Configuration DOLBY / DTS Dolby TrueHD 75 ■When selecting the Advanced Configuration 77 ■When selecting the Quick Audio Reference/Adjustment Wide NTSC 79 dB 81 dB • For the setting details, see page in .
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 58 SETTING THE SYSTEM SETUP ENGLISH • AMP Assign : To assign the surround back channels' power amplifier correctly depending on how to use the speakers. • Subwoofer Mode : To select the desired subwoofer mode. • Monitor Output : To select the MONITOR OUT from which the video signals are output. • Video Scaling : To set the resolution of video signals to be output to match that of your TV.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 59 Continued When selecting the Subwoofer Mode Normal : When the low frequency signals of channels set to "Full" are reproduced from those channels only. In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency signals of LFE (from the multi-channel sources that contains LFE(Low Frequency Effects) channel, also called the ".1" channel) and the channels set to the setting value other than "Full".
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 60 Continued ENGLISH When selecting the HDMI Audio Output • The HDMI connection can carry uncompressed digital video signals and digital audio signals. Depending on whether the digital audio signals are output from the HDMI MONITOR OUT of this receiver or not, you should set the HDMI Audio Output correctly.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 61 • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.. AUTO SETUP Optimizer • AUTO SETUP (Trinnov) Optimizer : To set the speaker setup and speaker level automatically.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 62 Continued 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the AUTO SETUP (Trinnov) Optimizer, then press ENGLISH the ENTER button. When calibrating at a position When checking the results memorized into the memory of the position ■Note : • When EXTERNAL IN or USB is selected as an input source, calibration does not work. 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired position to calibrate, then press the ENTER button.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 63 5. Press the CURSOR UP(▲)/DOWN(▼) buttons to select "COMPUTATION START", then press the ENTER button. ENGLISH When the computation has been completed. • If a series of computation procedure has been completed, the results are displayed. • To check the next or the previous results, press the CURSOR UP(▲)/DOWN(▼) buttons to select "NEXT" or "PREVIOUS", then press the ENTER button.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 64 Continued When selecting the Speaker Configuration ENGLISH • Only when the Trinnov Position is set to "None", you can set the Speaker Configuration manually. (For details, refer to "When selecting the Trinnov Position" on page 72.) 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Configuration, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker. 3.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 65 • Only when the Trinnov Position is set to "None", you can set the Crossover Frequency manually. (For details, refer to "When selecting the Trinnov Position" on page 72.) • Set the crossover frequency according to the frequency characteristics of the speakers connected. (For details on the frequency characteristics, refer to the operating instructions of the speakers.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 66 When selecting the Speaker Distance ENGLISH • Only when the Trinnov Position is set to "None", you can set the Speaker Distance manually. (For details, refer to "When selecting the Trinnov Position" on page 72.) 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Distance, then press the ENTER button. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 67 When selecting the Speaker Level Trim 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the Speaker Level Trim, then press the ENTER button. Memory mode ■Adjusting the current channel level • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("TRIM"), not into preset memory("REF 1", "REF 2").
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 68 ■Memorizing the adjusted channel levels • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. ENGLISH 2. After performing the steps 2~4 in "Adjusting the current channel level" procedure on page 67, press the CURSOR UP(▲)/DOWN(▼) buttons to select a channel (, not the Mode (memory mode) and the LFE), then press the ENTER button. 3.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 69 ENGLISH SETTING THE INPUT SETUP • The input setup menu allows you to make the various settings depending on how to use the input sources connected to this receiver. ■When moving to the next or the previous page • Press the CURSOR UP(▲)/DOWN(▼) buttons to select "GO TO NEXT (or PREV) ~ ", then press the ENTER button. When selecting the items other than NAME 1.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 70 Continued ENGLISH 3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired. When selecting the HDMI Assign • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 5. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 8.) • You can select the desired of HDMI 1 ~ HDMI 4.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 71 Continued • You should select the audio input signal to be played. ■Notes : • Be sure to set the Audio Mode to the audio input which is connected and assigned to the selected input source. • When the HDMI Audio Output is set to On, no sound will be heard from the speakers connected to this receiver (except ROOM 2 speakers).
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 72 Continued ENGLISH When selecting the HD Audio • When the source components that cannot support the HD audio signal format (such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, DTS-HD Master Audio, etc.) are connected to the HDMI IN of this receiver, some components may not output any audio signals from its HDMI OUT. In this case, you should set the HD Audio to Off to play the audio signals other than the HD audio signals.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 73 Continued When selecting the Trinnov Spatial Mode → None : No remapping is applied. ↕ DLY + LVL (Delay + Level) : The distance and speaker levels are compensated so that all speakers seem to be the same ↕ distance from the lisetener and all speakers seem to be the same level. Autoroute : Each input channel is routed to the nearest speaker, according to the input stream format and to the ITU ↕ standards.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 74 Continued ENGLISH 2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired digit. 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to enter the desired character on the selected digit. • You can enter the desired among blank, A~Z, a~z, 0~9, (,), , +, , -, ., /. 4. Repeat the above steps 2 and 3 to enter the desired characters on the rest of the digits. 5. Confirm your entry. • The name is stored in the memory.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 75 • Night Mode/DRC : To adjust the dynamic range compression that makes faint sound easier to hear at low volume levels. • Dolby PL II Music : To adjust the various surround parameters for optimum surround effect. • Dolby Virtual Speaker : To select the speaker layout to be used actually for each Dolby Virtual Speaker mode. • Dolby Headphone : To select the desired listening mode for Dolby Headphone mode. DOLBY / DTS Dolby TrueHD 1.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 76 Continued When selecting the Dolby PL II Music Parameters ENGLISH • You can adjust the various surround parameters for optimum surround effect. ■Note: • The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the Dolby Pro Logic IIx Music mode. ■When adjusting the Panorama mode This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 77 SETTING THE MULTI ROOM CONFIGURATION • Room 2 : To turn on or off the ROOM 2 function. • Input : To select the desired ROOM 2 source. • Volume : To adjust the ROOM 2 volume. • Bass and Treble : To adjust the tone(bass and treble) for ROOM 2 source as desired. • Room 3 : To turn on or off the ROOM 3 function.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 78 Continued ■When selecting the Input • You can select the desired among Main source, Tuner, CD, Tape, Video 1 ~ Video 5 as a ROOM 2 source. ENGLISH ■When selecting the Volume • You can adjust the ROOM 2 volume. ■When selecting the Bass and the Treble • The tone level can be adjusted within the range of -10 ~ +10 dB. • In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 79 Wide NTSC • Monitor Aspect : To select the aspect ratio of your TV's screen. • Noise Reduction : To reduce the video noise. • Video Enhancer : To adjust the sharpness of the picture. ■Note: • The Video Format is not set to anything other than NTSC. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item. 2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected item as desired.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 80 Continued When selecting the Noise Reduction ENGLISH Off : To turn off the noise reduction function. ↕ On : To reduce the video noise. When selecting the Video Enhancer Off: To turn off the video enhancer function. ↕ On : To adjust the sharpness of the picture.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 81 SETTING THE QUICk AUDIO REFERENCE / ADJUSTMENT ■Notes : dB dB • When the EXTERNAL IN or the USB is selected as an input source, the trinnov settings cannot be set. • Center Level, Subwoofer Level and Tone Control can be set only when the Trinnov Position is set to "None". 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item. 2. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 82 Continued When selecting the Tone Control ENGLISH • You can adjust the tone (bass and treble) as desired. Off : To listen to a program source without the tone effect. ("TONE" goes off.) ↕ On : To adjust the tone for your taste. ("TONE" lights up.) ◆When the Tone Control is set to On to adjust the tone (bass and treble) ①. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone mode. ②.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 83 Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power • The AC input cord is disconnected. • Poor connection at AC wall outlet or the outlet is dead or off. • Connect cord securely. • Check the outlet using a lamp or another appliance. No sound • The speaker wires are disconnected. • The master volume is adjusted too low. • The MUTE button is pressed to ON. • Incorrect selection of input source.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 84 ENGLISH Specifications ■AMPLIFIER SECTION • Power output, stereo mode, 8 Ω, 20 Hz~20 kHz | 2× 100 W • Total harmonic distortion, 8 Ω, 1 kHz | 0.02 % • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE | 0.
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 9:01 페이지 85 Setup Code Table TV Daewoo Daytron Denon Dumont Dwin Electroband Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter 005 041 014 005 026 024 027 043 027 030 027 003 019 027 003 028 027 005 005 010 050 030 012 011 027 027 010 027 007 012 022 030 003 016 002 044 050 019 003 005 019 026 027 027 007 004 002 003 031 047 027 048 014 Goldstar Gradiente Grunpy Hallmark Harley Davidson Harman/Kardon Havard Hitachi Infinity Inteq JBL JCB JVC KEC
ENGLISH R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RCA Radio Shack Realistic Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Sherwood Shogun Signature Sony Soundesign Squareview Starlite Supreme Sylvania Symphonic TMK Tandy Technics Technoi Ace Techwood Teknika Telefunken Toshiba Totevision Vector Research Victor Vidikron 005 022 003 008 007 025 002 008 007 037 007 003 019 011 002 027 005 012 006 03
Headquarter Hitachi JVC Jensen KEC KLH Kenwood Kodak LXI Lloyd’s Logik MEI MGA MGN Technology MTC Magnasonic Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NEC Nikko Noblex Olympus Opimus Orion Panasonic Penny Pentax Philco Philips Pilot Pioneer Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA Radio Shack Radix Randex 011 000 014 026 005 015 014 004 005 000 015 004 023 023 023 025 004 023 004 005 004 004 000 008 027 004 000 017 005 023 004 005 031 020 004
R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 ENGLISH HQ Lloyds MGA Megavox Magnin Memorex Mitsubishi Orion Panasonic Penney Quasar RCA Sansui Sanyo Sear Sharp Sony Symphonic Zenith 9:01 페이지 88 000 000 023 016 (TV use 010) 004 (TV use 008) 000 023 005 028 (TV use 042) 027 (TV use 041) 001 004 (TV use 008) 028 (TV use 042) 004 (TV use 008) 023 028 (TV use 042) 004 (TV use 008) 028 (TV use 042) 013 (TV use 007) 004 (TV use 008) 027 (TV use 041) 000 023 000 005 027 (TV use 041) 002 (TV use 050) 000 000 CBL AB
Hitachi Insight Jasco Jerrold Magnavox Massillon Media One Medicom Memorex Mitsubishi Motorola Movie Time Moxi Nctc NSC Oak Optimus Pace Panasonic Paragon Philips Pioneer Popular Mechanics Prucer Pulsar Quasar RCA Radio Shack Recoton Regal Regency Rembrandt Rodgers Runco Samsung Scientific Atlanta Seren Service Electric Shaw Sherwood Sigecom Signal Signature SL Marx Sony Sprucer Starcom 006 085 010 002 006 042 043 085 111 074 000 106 085 015 106 085 015 011 031 063 000 000 018 099 017 079 022 077 000 000
ENGLISH R-972(A)_ENG_090225:R-972(A) 2009-04-15 오 Primestar Proscan Radio Shack RCA Realistic RSA Samsung Sherwood SKY Sony Star Choice Toshiba Uniden Zenith 016 033 018 003 014 033 025 000 046 004 018 010 006 013 9:01 페이지 90 AUX-CD AMP 015 021 031 000 002 012 021 037 032 045 051 054 019 014 036 027 039 020 031 026 005 041 032 Aiwa Carver Curtis Mathes Denon Harman/Kardon Linn Megavox Marantz Panasonic Philips Pioneer Sony Technics Wards Yamaha 040 AUX-MD Sherwood 035 (for Mini Disc) 0
9:01 페이지 91 CD Aiwa Burmester California Audio Lab Carver DKK Denon Emerson Fisher Garrard Genexxa Harman/Kardon Hitachi JVC Kenwood Krell LXI Linn MCS MTC Megavox Marantz Mission NSM Nikko Onkyo Opimus Panasonic Parasound Philips Pioneer Proton QED Quasar RCA Realistic Rotel SAE Sansui Sanyo Scott Sears Sharp Sherwood Sony Soundesign 010 019 002 010 001 028 035 012 019 004 010 004 007 003 010 035 010 002 019 010 002 010 010 033 008 001 019 002 019 010 004 010 010 002 012 012 010 010 010 012 035 035 029 0
cover_ENG:cover 2009-03-05 오 4:49 페이지 2 R-972 5707-00000-123-0S