cover_8504:cover_8504 2009-09-21 오 11:28 페이지 1 RD-8504
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 2 Introduction ENGLISH READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 3 • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 4 ENGLISH System Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 5 • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2/VIDEO 3 can also be connected to an additional video component such as a cable TV tuner or satellite system. • Connect the jacks of VIDEO 3 to the video component in the same way.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 6 Continued ENGLISH ■HDmI (High Definition multimedia Interface) connection : (*1) • You can connect the source component (BD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. • The HDMI connection can carry uncompressed digital video signals and digital audio signals. • The HDMI video stream signals (video signals) are theoretically compatible with DVI-D.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 7 SURROUND SUBWOOFER FRONT CENTER SUR.BACK • Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs. • In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit. (For details, refer to the operating instructions of the component to be connected.) EXTERNAL IN 5.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 8 ENGLISH 6. CONNECTING SPEAkERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to "Speaker placement" on page 9.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 9 Continued ■Connecting speaker wire 2. Lossen by turning the speaker terminal counterclockwise. 3. Insert the bare part of the wire. 4. Tighten by turning it clockwise. ENGLISH 1. Strip away approx. 10 mm (3/8 inch) of wire insulation, then twist the wire ends tight. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 10 ENGLISH 8. CONNECTING ROOm 2 OUTS • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the ROOM 2 speaker terminals to the speakers.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 11 ENGLISH Front Panel Controls 1. POWER switch 2. POWER ON/STANDBY button 3. STANDBY indicator 4. INPUT SELECTOR knob 5. BAND button 6. EXTERNAL IN button 7. SURROUND MODE/CONTROL DOWN(▼) button 8. STEREO/CONTROL UP(▲) button 9. MASTER VOLUME CONTROL knob 10. MULTI CONTROL knob(◀/▶) 11. HEADPHONE jack 12. SPEAKER button 13. ROOM 2 button 14. CHANNEL LEVEL button 15. SETUP button 16. MEMORY/ENTER button 17. TUNING UP(+)/DOWN(-) buttons 18.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 12 ENGLISH ■ SETUP mIC JACk • To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When selecting the Auto Setup" on page 43.) ■Notes: • Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 13 This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as iPod docks, CD players, tape decks, TVs, BD/DVD players, satellite receivers, cable boxes, etc. • To operate 7 components other than this receiver, you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 16.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 14 ■FUNCTION TABLE of the NUMBERED BUTTONS.
11:36 페이지 15 oPeRAtInG coMPonents WItH ReMote contRoL 1. Enter the setup code for each ReMote contRoL oPeRAtIon RAnGe • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. component other than this receiver. For details, refer to "Entering a setup code" on page 16. 2. Turn on the component you want to operate. 3. Press the DEVICE button on the remote control corresponding to the component you wish to operate. 4.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 16 ENGLISH UsInG FUnctIons oF ReMote contRoL • This remote control can control up to 8 different components. • Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 17 ■Removing a punch-through function • When removing the AUDIO volume punch-through, press and hold down both “AVR” button and “VOLUME -” button for more than 1 second. This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch-through in conjunction with any of the 8 components controlled by this remote control.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 18 ENGLISH Programming a macro function 3. Press “ENTER” button. • The macro function enables you to program a series of button operations(up to 10) on this remote control into a single button. • You can store up to three separate macro command sequences into “M1”, “M2” and “M3” buttons. 1. Press and hold down both “ENTER” button and one of three NUMERIC buttons (“1” ~ “3”) corresponding to “M1”~”M3” buttons for more than 1 second.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 19 ■Notes: • Before operating this receiver with the supplied remote control, refer to "Universal Remote Controls" on page 13 for details about operation. • Before operating this receiver, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to "OSD Menu Settings" on page 36.) LISTENING TO A PROGRAm SOURCE 3. Select the desired input source. Before operation • Enter the standby mode.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 20 ENGLISH When CD, F.AUx, VIDEO 1~ 4, ExT.IN is selected as an input source 6. Operate the selected component for playback. • When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 23. • If the Audio Mode is set to the mode other than "Digital" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 21 sURRoUnD soUnD Surround modes ■DTS Digital Surround ■Dolby Digital DTS Digital Surround(also called simply DTS) supports up to 5.1 discrete channels and uses less compression for high fidelity reproduction. Use it with DVDs and CDs bearing the DTS logo. Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Discs bearing the Dolby Digital logo includes the recording of up to 5.1 channels of digital signals.
ENGLISH RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 22 ■Room This mode provides the sound field of a house with a low ceiling and hard walls for jazz music. • The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to high performance Digital Signal Processor to recreate sound fields artificially. Select one of the 7 provided surround modes according to the program source you want to play.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 23 ■Notes: • Before surround playback, first perform the speaker setup procedure, etc. on the OSD menu for optimum performance. (For details, refer to "SETTING THE SPEAKER / ROOM EQ SETUP" on page 43.) • When playing digital signals from the Dolby Digital program source or selecting the surround mode such as Dolby Pro Logic II /Dolby Pro Logic IIx Music mode, you can adjust their parameters for optimum surround effect.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 24 Continued ■To cancel the surround mode for stereo operation ENGLISH • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the MULTI CONTROL knob on the front panel or the SURROUND MODE UP/DOWN (〉 /〈) buttons on the remote control.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 25 • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("CAL"), not into preset memory("MOVIE" for movieo source, "MUSIC" for music source). 1. Press the CHANNEL LEVEL button.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 26 memorizing the adjusted channel levels ENGLISH • You can memorize the adjusted channel levels into preset memory("MOVIE", "MUSIC") and recall the memorized whenever you want. 1. After performing the steps 1~4 in "Adjusting the current channel level" procedure on page 25, press the (MEMORY/)ENTER button. • The "MOVIE" flickers for several seconds. 2. Select the desired one of MOVIE and MUSIC.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 27 LISTENING TO RADIO BROADCASTS 1. Select the desired band. • Manual tuning is useful when you already know the frequency of the desired station. • After selecting the desired band, press the TUNING UP(+)/DOWN(-) buttons repeatedly until the right frequency has been reached. Auto presetting • Auto presetting function automatically searches for FM stations only and store them in the memory.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 28 manual presetting Tuning to preset stations ENGLISH • You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the desired preset number. 1. Tune in the desired station with auto or manual tuning. 2. Press the (MEMORY/)ENTER button. • "MEM" is flickering for several seconds. 3. Select the desired preset number (1~30) and press the (MEMORY/)ENTER button.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 29 RDS Tuner(Regional Option for some countries in Europe, etc.) RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following information. Program Service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT).
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 30 PTY search ENGLISH • Use this function to automatically search and receive the stations broadcasting the desired program type. 3. While displaying the desired program type. 1. In the FM mode, select the PTY search mode. • The tuner automatically searches a station offering PTY services. • If no station is found, "NO PROG" is displayed. • "PTY SRCH" is displayed. 2. While displaying "PTY SRCH", select the DISPLAY desired program type.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 31 • The analog signals from the EXTERNAL INs as well as the digital signals from the HDMI IN, the OPTICAL or the COAXIAL DIGITAL IN can be heard but cannot be recorded. • When recording the analog signals from CD, F.AUX, VIDEO 2~4, be sure to select "Analog" for the Audio Mode. (For details, refer to "When selecting the Audio Mode" on page 53.) • The volume and tone (bass, treble) settings have no effect on the recording signals.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 32 ENGLISH DIGITAL AUDIO RECORDING WITH mD RECORDER 2. For digital recording, select the digital input as • Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 33 OTHER FUNCTIONS • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90 → OFF Unit : minutes • While operating the sleep timer, " " lights up.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 34 ROOm 2 SOURCE PLAYBACk ENGLISH • This function allows enjoying one source in the main room and playing another in a different room at the same time. ■Notes: • The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room. • Only the (composite) video signals can be output to the different room.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 35 When using the buttons on the remote control unit • ROOM 2 ~ is displayed for several seconds. • Each time the button is pressed, the ROOM 2 mode changes as follows : ON : To turn on the ROOM 2 function. ↕ ("R2" lights up.) OFF : To turn it off. ("R2" goes off) ■Note : • When ROOM 2 mode is set to OFF, the ROOM 2 volume cannot be selected. 2. Select the desired input as a ROOM 2 source.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 36 ENGLISH OSD Menu Settings • The OSD (On-Screen Display) menu is a setting menu that is displayed on the monitor TV and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 37 • When the CURSOR LEFT button is pressed on a submenu, etc. the previous menu will be returned. ■When selecting the System Setup BACK Amp Assign Subwoofer mode HDMI Audio Output Tone Control Bass Treble Cinema EQ Momentary OSD Save/Recall ■When selecting the Speaker/Room EQ Setup NEXT BACK 40 ■When selecting the Input Setup BACK VIDEO 1 V2/iPod VIDEO 3 VIDEO 4 CD TAPE F.AUX TUNER EXT.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 38 Setup menu flow : Default settings ENGLISH SYSTEM AMP ASSG (Amp Assign) AMP : B / R2 (Surr Back ȧ Room 2) / BI-A (Bi Amp) / SW MODE (Subwoofer Mode) SW M : NORM (Normal) / SW+ (Subwoofer Plus +) HDMI AUD (HDMI Audio Output) HDMI : SPK (Speaker) / PASS (HDMI Passthrough) TONE (Tone Control) TONE : OFF / ON BACK (Surround Back) / R2 (Room 2) (System Setup) BASS BASS : 0 dB / -10 ~ +10 TREBLE TRBL : 0 dB / -10 ~ +10 C-EQ (Cinema EQ)
11:36 페이지 39 INPUT*3 VID1 CFG RE-NAME*1 (Input Setup) (VIDEO1 Configuration) HDMIASSG (HDMI Assign) HDMI : HD1 ~ 3 (HDMI 1 ~ 3) / - - - V2IPDCFG CPN ASSG (Component Assign) CPN : CPN1 ~ 2 (Component 1 ~ 2) / - - - (VIDEO2/iPod Configuration) AUD ASSG (Audio Assign) AUD : OPT1 ~ 2 (Optical 1 ~ 2) / VID3 CFG COX1 ~ 2 (Coaxial 1 ~ 2) / - - V.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 40 SETTING THE SYSTEm SETUP ENGLISH BACK Amp Assign Subwoofer mode HDMI Audio Output Tone Control Bass Treble Cinema EQ Momentary OSD Save/Recall NEXT • AMP Assign : To assign the surround back channels' power amplifier correctly depending on how to use the speakers. • Subwoofer Mode : To select the desired subwoofer mode. • HDMI Audio Output : To output the digital audio signals from the HDMI MONITOR OUT connector.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 41 Continued When selecting the AmP Assign Surr Back ↔ Room 2 : When connecting this receiver to the surround back speakers and the ROOM 2 speakers both, the ↕ power amplifier automatically drives the surround back speakers or the ROOM 2 speakers depending on whether the ROOM 2 function is turned off or on. Bi AMP : To drive the front bi-amp capable speakers when connecting the FRONT and the SURROUND BACK/MULTI ↕ channels to them.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 42 Continued ENGLISH When selecting the Cinema EQ On : To compensate for edgy or shrill movie sound tracks. ↕ Off : To turn off the cinema EQ function. When selecting the momentary OSD On : To turn on the OSD function that shows the status corresponding to each operation on this unit momentarily. ↕ Off : To turn it off. ■Note : • The OSD menu and the momentary OSD can be displayed via the HDMI MONITOR OUT only.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 43 • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 44 Continued 2. Press the CURSOR UP/DOWN buttons to select the Auto Setup, then press the CURSOR RIGHT button. ENGLISH BACK Before starting the system, please plug the MIC. in using the front panel jack. NEXT <> The test tone is LOUD. 3. Press the CURSOR RIGHT button to start the auto setup procedure. When the auto setup has been completed.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 45 • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers. • If you use different brands or sizes of speakers for some channels or have a room with unique acoustic characteristics, such as walls, furniture, and the dimensions or the shape of the room, we recommend using the room EQ.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 46 When selecting the Speaker Configuration 1. Press the CURSOR UP/DOWN buttons to select the Speaker Configuration, then press the CURSOR RIGHT ENGLISH button to enter the setting menu. BACK Front Center Surround Surr Back Subwoofer NEXT 2. Press the CURSOR UP/DOWN buttons to select the desired speaker, then press the CURSOR RIGHT button to enter its setting menu. 3.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 47 • Set the crossover frequency according to the frequency characteristics of the speakers connected. (For details on the frequency characteristics, refer to the operating instructions of the speakers.) • If the frequency range of your speaker is 100 Hz ~ 20 kHz, the crossover frequency should be set to 100 Hz (or slightly higher).
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 48 When selecting the Speaker Distance 1. Press the CURSOR UP/DOWN buttons to select the Speaker Distance, then press the CURSOR RIGHT ENGLISH button to enter the setting menu. BACK UNIT Front Left Center Front Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer NEXT 2. Press the CURSOR UP/DOWN buttons to select the desired item, then press the CURSOR RIGHT button to enter its setting menu.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 49 • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("Calibrate"), not into preset memory("Save 1(Movie)", "Save 2(Music)"). • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes.(For details, refer to "Adjusting each channel level with test tone" on page 24.) 1.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 50 Continued ENGLISH ■memorizing the adjusted channel levels and recalling them. • You can memorize the adjusted channel levels into preset memory(“Save 1(Movie)”, “Save 2(Music)”) and recall the memorized whenever you want. 1. Press the CURSOR UP/DOWN buttons to select the MODE on the Channel Level menu, then press the CURSOR RIGHT button to enter the setting menu. 2.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 51 SETTING THE INPUT SETUP VIDEO 1 V2/iPod VIDEO 3 VIDEO 4 CD TAPE F.AUX TUNER EXT.IN NEXT • This menu allows you to make the various settings depending on how to use the input sources connected to this receiver. When selecting the items other than Re-Name 1. Press the CURSOR UP/DOWN buttons to select the desired input source, then press the CURSOR RIGHT button to enter the setting menu.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 52 Continued ENGLISH ■When selecting the HDmI Assign • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 4, EXT.IN. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 5 ~ 6.) • You can select the desired of HDMI 1 ~ HDMI 3.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 53 Continued ■When selecting the Audio mode ■Notes : • Be sure to set the Audio Mode to the audio input which is connected and assigned to the selected input source. • When the HDMI Audio Output is set to HDMI Passthrough, no sound will be heard from the speakers connected to this receiver (except ROOM 2 speakers). • When the Audio Mode is set to HDMI, you should connect the HDMI INs and set the HDMI Assign correctly.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 54 Continued ENGLISH ■When selecting the HD Audio • When the source components that cannot support the HD audio signal format (such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, DTS-HD Master Audio, etc.) are connected to the HDMI IN of this receiver, some components may not output any audio signals from its HDMI OUT. In this case, you should set the HD Audio to Off to play the audio signals other than the HD audio signals.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 55 Continued 3. Press the CURSOR LEFT/RIGHT buttons to select the desired digit. 4. Press the CURSOR UP/DOWN buttons to enter the desired character on the selected digit. • You can enter the desired among blank, A~Z, a~z, 0~9, (, ), +, ,, ― , ., /. 5. Repeat the above steps 3 and 4 to enter the desired characters on the rest of the digits. ■To resume its factory input source name • Enter a blank on each digit. 6.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 56 SETTING THE mULTI ROOm SETUP ENGLISH • The Room 2 function allows enjoying one source in the main room while playing another in a different room at the same time. BACK Room 2 Set Input Volume NEXT • Room 2 : To turn on or off the ROOM 2 function. • Input : To select the desired ROOM 2 source. • Volume : To adjust the volume on the power amplifier assigned to "Surr Back ↔ Room 2" or "Room 2".
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 57 BACK Dolby Pro Logic II Music Panorama Center Width Dimension Night Mode Dolby Dolby TrueHD NEXT • Dolby Pro Logic II Music : To adjust the various surround parameters for optimum surround effect. • Night Mode : To adjust the dynamic range compression that makes faint sound easier to hear at low volum levels. 1. Press the CURSOR UP/DOWN buttons to select the desired itme, then press the CURSOR RIGHT button to enter its setting menu. 2.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 58 SETTING THE ADVANCED VIDEO ENGLISH BACK PReP Detail Enhancement Edge Enhancement Mosquito NR Test Patterns OSD Transparency NEXT • PReP : To improve the progressive video signal by progressive reprocessing. • Detail Enhancement : To enhance the entire picture by making details stand out. • Edge Enhancement : To enhance the picture by shapening object edges. • Mosquito NR : To remove the mosquito noise.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 59 Troubleshooting Guide PROBLEm POSSIBLE CAUSE REmEDY No power • The AC input cord is disconnected. • Poor connection at AC wall outlet or the outlet is dead or off. • Connect cord securely. • Check the outlet using a lamp or another appliance. No sound • The speaker wires are disconnected. • The master volume is adjusted too low. • The MUTE button is pressed to ON. • Incorrect selection of input source.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 60 ENGLISH Specifications ■AmPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 1.0 %, 40 Hz~20 kHz | 2× 100 W • Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.01% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 95 W | 0.
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 61 Setup Code Table ADMIRAL AKAI ALBA ALBIRAL ALCATEL AMSTRAD ANAM ARC EN CIEL ARISTONA ARTHUR MARTIN ASA ATLANTIC AUDIOSONIC AUSIND AUTOVOX BAIRD BASICLINE BAUR BEKO BLAUPUNKT BENQ BRANDT BRION VEGA BRUNS BSR BUSH CENTURY CGE CIHAN CLARIVOX CONDOR CONTEC CONTINENTAL EDITION CROSLEY CROWN CTC CLATRONIC DAEWOO DECCA DEGRAAF DIXI DRYNATRON DUAL DUAL-TEC DUMONT ELBE ELBIT 050 093 068 116 022 158 155 028 099 078 053 125 050 099 054 053 099 083 006 011
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 INNO HIT ENGLISH INTERFUNK IRRADIO ITT JVC KTV KAISUI KARCHER KENDO KENNEDY KORTING KRIESLER LENOIR LOEWE OPTA LOGIK LUMA LUXOR MAGNADYNE MAGNAFON MARANTZ MATSUI McMICHAEL MEMOREX METZ MINERVA MISTRAL MITSUBISHI MIVAR MULTITECH MURPHY MAONIS NATIONAL NEC NECKERMANN NEI NIKKAI NOBLEX NOBLIKO NOGAMATIC NOKIA 093 090 047 142 093 001 123 135 033 099 006 006 098 144 050 099 078 099 008 072 118 049 058 135 046 127 046 049 158 134 088 090 094 094 149 033 118 097 0
SAMBERS SAMPO SAMSUNG SANYO SBR SCHAUB LORENZ SCHNEIDER SEG SEI SELECO SHARP SIAREM SICATEL SIEMENS SIERA SILVER SINGER SINUDYNE SONOKO SONY STERN TANDBERG TANDY TASHIKO TATUNG TEC TELEAVIA TELEFUNKEN TELETECH TELEVIDEON TENSAI THOMSON THORNFERGUSON TOCOM TOSHIBA TRANS CONTINENTS TRIUMPH UHER ULTRA VOX 046 121 015 090 161 060 049 161 129 096 141 132 046 158 016 069 033 046 116 005 087 099 078 054 016 158 049 146 096 133 099 162 099 096 028 081 028 090 099 049 012 145 014 061 029 004 098 158 052 098 11:36
ENGLISH RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 FUNAI GE GENERAL GOLDSTAR GOODMANS GRAETZ GRANADA GRUNDIG HANSEATIC HARMANKARDON HIFIVOX HINARI HITACHI IMPERIAL INGELEN INGERSOL ITT JENSEN JVC KENWOOD KRIESLER KUBA LLOYD LOEWE OPTA LOGIK LUXOR MAGNADYNE MAGNASONIC MAGNAVOX MARANTZ MATUI MEMOREX METZ MGA MINERVA MINOLTA MITSUBISHI MTC MULTITECH MURPHY NAONIS NATIONAL NEC NECKERMANN NOGAMATIC NOKIA NORDMENDE OPTONICA ORION 011 019 014 004 008 041 003 014 054 043 004 042 002 006 011 042 027 005 033 04
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 TOSHIBA TOTELEVISION UHER ULTRA VOX UNITECH UNIVERSUM URANYA VECTOR VICTOR VIDITAL WESTING HOUSE WARDS YAMAHA ZANUSSI ZENDER ZOPPAS 008 042 039 036 001 013 042 041 013 041 041 004 042 041 041 019 004 042 052 042 CBL 056 052 042 059 030 052 034 ABC 042 056 017 058 052 014 043 Allegro Archer Bell&Howell Century Citizen Comtronics Contec Easten Emerson Everquest Focus Garrard Gemini General Instrument GoldStar Goodmind Hamlin Hitachi Jasco Jerrol
ENGLISH RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 Stargate Starquest TV86 Teleview Tocom Tusa Unika Universal Viewstar Zenith Zentek 010 010 015 014 007 010 018 018 015 024 022 014 11:36 페이지 66 026 MAGAI MARANTZ MASPRO METZ MINERVA MULTISTAR MURATO NEC NEIRU NOKIA NORSAT PACE PANASONIC PHILIPS PHONOLA PROSAT PYE QUADRAL QUELLE RADIOLA REDIFFUSION SABA SALORA SAMSUNG SAT PARTNER SATPORTNER SCHAUB LORENZ SCHNEIDER SHERWOOD SIEMENS SIERA SILVA SKY STARCOM STARSAT TECHNISAT TELEFUNKEN TELESYSTEM THOR
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 67 ADCOM AIWA AKAI AUDIO ARC EN CIEL DENON FISHER H/K JVC KENWOOD MARANTZ MONDIAL NAD NAKAMICHI NIKKO ONKYI PANASONIC PHILPS PIONEER RCA REALISTIC SANSUI SHARP SHERWOOD SONY TEAC TECHNICS VICTOR YAMAHA AUX-USB/MD 021 045 046 016 036 230 054 006 017 028 003 015 033 048 049 016 013 051 014 005 007 045 040 019 000 058 050 055 051 001 044 SHERWOOD 039 022 014 027 012 034 020 014 047 001 010 002 042 037 052 011 008 009 041 053 035 030 029
cover_8504:cover_8504 2009-09-21 오 11:28 페이지 2 RD-8504 5707-00000-274-0S
