Specifications

14
Wisdom 3 DC Manual
© 2002 Design, 2011 Doc. No. 12-5274-r01 (8/31/11)
TIME
DESAT
AIR
TIME
DESAT
NITROX
FO2%
In addition to the DATA screens, you can use also use the front (Advance) button to access the -
• PLAN screens (sequence of allowed dive depths/times )
• LAST screen (previous dive's data)
• LOG screens
• HISTORY screen
• SIMULATOR Mode
• SET Modes
FLY/DESAT appears automatically 2 hours after a dive. Desat time also appears on DATA displays.
DATA SCREENS
The DATA screens are accessible during a new activation period or greater than 10 minutes after surfacing
from a dive. By pressing the front (Advance) button 1 time while the TIME (or WET) screen is being dis-
played (TIME/WET > DATA), you can access the DATA screen representing the Mode that you set the dive
computer to operate in (Nitrox, Air, or Gauge described later).
You can also access the DATA screen when FLY/SAT is being displayed during the period from 2 hours to 24
hours after a dive pressing the front (Advance) button 1 time to rst recall the TIME/WET screen from which
you can access to the sequence of Surface Displays.
FLY/SAT > TIME/WET > DATA > PLAN > LAST > LOG > HISTORY > SIMULATOR > SET
ALTITUDE LEVEL Graphics that appear on DATA or Log/History screens represent the following -
SEA = 0 to 3,000 feet (915 meters)
LEV2 = 3,001 to 5,000 feet (916 to 1,525 meters)
LEV3 = 5,001 to 7,000 feet (1,526 to 2,135 meters)
LEV4 = 7,001 to 9,000 feet (2,136 to 2,745 meters)
LEV5 = 9,001 to 11,000 feet (2,746 to 3,355 meters)
LEV6 = 11,001 to 13,000 feet (3,356 to 3,965 meters)
LEV7 = 13,001 to 14,000 feet (3,966 to 4,270 meters)
outr = > 14,000 feet (> 4,270 meters)
AIR MODE DATA screen (Fig. 14)
• Alpha graphic DATA
• Alarm icon (if all alarms set On)
• Temperature and graphic (F or C)
• DeSat time and graphic, if any
• AIR graphic (indicating operating mode)
• Altitude level graphic if > Sea level as LEV2 (through LEV7), or outr (out of range)
NITROX MODE DATA screen (Fig. 15)
• Alpha graphic DATA
• Alarm icon (if all alarms set On)
• Temperature and graphic (F or C)
• DeSat time and graphic, if any
• NITROX graphic (indicating operating mode)
• PO2 and FO2 set points, and FO2 graphic
• Altitude level graphic if > Sea level as LEV2 (through LEV7), or outr (out of range)
While viewing the AIR or NITROX DATA screen -
• Pressing Both buttons for < 2 seconds activates the Backlight.
• Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.
• Pressing the front (Advance) button accesses the PLAN screen.
The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
Fig. 14 - Air Mode Data
Fig. 15 - Nitrox Mode
Data