Specifications

18
Wisdom 3 DC Manual
© 2002 Design, 2011 Doc. No. 12-5274-r01 (8/31/11)
TIME
DIVE
FEET
MAXIMUM
HISTORY MODE
HISTORY records accumulative information for up to 999 Total Dives and 2999 Dive Hours, and retains the
information indenitely, even if the Battery is removed.
• 10 minutes after a Non-Violation Dive, pressing the front (Advance) button 5 times accesses HISTORY
MODE (TIME > DATA > PLAN > LAST > LOG > HISTORY).
HISTORY screen (Fig. 24)
• Alpha graphic HIST
• Maximum Depth attained and graphics MAXIMUM and FEET (or METERS)
• Total accumulated Dive Hours of 0:01 to 29:59 (hr:min), then 30 to 2999 (hours)
• Total Number of Dives (1 to 999)
• Highest Altitude level graphic SEA, or LEV 2 (through 7), or outr
While viewing the History screen -
• Pressing Both buttons for < 2 seconds activates the Backlight.
• Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.
• Depressing the front (Advance) button accesses the SIMULATOR screen.
The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SIMULATOR
Simulator Mode allows you to perform dive mode scenarios without getting wet. It also allows you to per-
form simulated New or Continuous (repetitive) dives and set simulated Surface Interval time. Calculations
performed for simulated dives utilize the dive computer’s real settings (i.e., FO2, Alarm values that you previ-
ously set, etc.). Cylinder Pressure is not utilized.
10 minutes after a Non-Violation Dive, pressing the front (Advance) button 6 times accesses the Simulator
Mode (TIME > DATA > PLAN > LAST > LOG > HISTORY > SIMULATOR).
Entering Simulator Mode displays the SIMULATOR GO TO screen.
SIMULATOR GO TO screen (Fig. 25)
• Alpha graphic SIMU
• Alpha graphic Go to -
While viewing the SIMU GO TO screen -
• Pressing Both buttons for < 2 seconds activates the Backlight.
• Pressing Both buttons for => 2 seconds reverts to the real TIME/WET screen.
• Pressing the front (Advance) button while the SIMU GO TO screen is displayed bypasses Simulator
Mode and accesses the PC screen.
The unit reverts to the real TIME/WET screen if neither button is depressed in 10 minutes. A quick beep Au-
dible Alert sounds when this happens.
While SIMU GO TO is being displayed, pressing and releasing the side (Select) button calls up the NEW GO
TO screen.
Subsequent pressing and releasing of the side (Select) button sequences through CONT GO TO, SIMU GO
TO, and NEW GO TO.
NEW GO TO screen (Fig. 26)
• Alpha graphic NEW
• Alpha graphic Go to -
Fig. 25 - Simulator Mode
Fig. 26 - New Dive
Fig. 24 - History