Specifications

Wisdom 3 DC Manual

Pressing and releasing the side (Select) button toggles between ON and OFF.

Pressing and releasing the front (Advance) button accepts the selection and advances to SET 2 GO TO.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET 3 GROUP (UTILITIES)

Pressing and releasing the side (Select) button 3 times while the SET GO TO screen is displayed, accesses the

SET 3 GO TO screen.

Pressing and releasing the front (Advance) button 1 time while SET 3 GO TO is displayed, accesses the SET

H2O SENSOR screen with the set point ashing.

SET H2O SENSOR (WET ACTIVATION) ON/OFF

Factory set ON, the H2O SENSOR can also be set OFF. When set OFF, the Wisdom 3 will not activate upon

immersion in water. Appearing on the screen (Fig. 50) will be -

• Alpha graphic H2O

• Graphic ON (or OFF), ashing

• Graphic SENSOr

Pressing and releasing the side (Select) button toggles between ON and OFF.

Pressing and releasing the front (Advance) button accepts the selection and advances to SET UNITS.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET UNITS (IMPERIAL/METRIC)

Factory set for Imperial, Units of Measure can also be set for Metric. Units of Measure must be set prior to

setting parameters that contain numerical Values

To access SET UNITS while viewing the SET 3 GO TO screen, press/release the front (Advance) button 2

times. Appearing on the screen (Fig. 51) will be -

• Alpha graphics FT, F, PSI (or M, C, BAR) ashing

Pressing and releasing the side (Select) button toggles between Imperial and Metric units.

Pressing and releasing the front (Advance) button accepts the selection and advances to SET SAMPLE

RATE.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET SAMPLE RATE VALUE

Sample Rate is the interval at which data is sampled for storage in memory for subsequent download to the

associated PC software program. This setting has no effect on the Rate at which data is Sampled for screen

displays that you view during unit operation.

Factory set for a Rate of 15 seconds (allowing 15 hours of data), Sampling Rate can also be set for 30 seconds

(for 30 hours) or 60 seconds (for 60 hours).

Fig. 50 - Set H2O Sensor

Fig. 51 - Set Units