Specifications

Wisdom 3 DC Manual

TIME

SET MONTH OF YEAR

Factory set for Month 1, the MONTH can also be set for Months 2 through 12.

To access SET MONTH while viewing the SET 4 GO TO screen, press/release the front (Advance) button 5

times. Appearing on the screen (Fig. 58) will be -

• Alpha graphic MNTH

• Graphic TIME

• Numerical Month, mm value ashing

• Numerical Day .dd value previously set

• Numerical Hour/Minute hh:mm values previously set

• Numerical Year value previously set

Pressing and holding the side (Select) button scrolls the MONTH in increments of 1 Month at a rate of 4 Set

Points per second.

Pressing and releasing the front (Advance) button accepts the selection and advances to SET DAY.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

SET DAY

Factory set for Day 01, the DAY can also be set for Days 02 through 31.

To access SET DAY while viewing the SET 4 GO TO screen, press/release the front (Advance) button 6

times. Appearing on the screen (Fig. 59) will be -

• Alpha graphic DAY

• Numerical Month mm: value previously set

• Numerical Day, .dd value ashing

• Graphic TIME

• Numerical Hour/Minute hh:mm value previously set

• Numerical Year value previously set

Pressing and holding the side (Select) button scrolls the DAY in increments of 1 Day at a rate of 4 Set Points

per second.

Pressing and releasing the front (Advance) button accepts the selection and advances to SET GO TO.

Pressing Both buttons for < 2 seconds activates the Backlight.

Pressing Both buttons for => 2 seconds reverts to the TIME/WET screen.

The unit reverts to the TIME/WET screen if neither button is pressed in 2 minutes.

Fig. 58 - Set Month

Fig. 58 - Set Day