Specifications

33
Wisdom 3 DC Manual
© 2002 Design, 2011 Doc. No. 12-5274-r01 (8/31/11)
PSI
FEET
TIME
DIVE
FEET
MAXIMUM
NITROX
O2
N2
SAFE
MINUTES
PSI
FEET
NITROX
O2
N2
TIME
SAFE
MINUTES
G


PSI
FEET
NITROX
O2
N2
FO2%
Example:
• You set the End Pressure Alarm for 300 PSI (20.5 BAR)
• You are at a Depth of 60 FT (20 M)
• Air Time Remaining decreases to 0 (minutes)
• You Ascend at a maximum rate of 30 FPM (10 MPM)
• You surface with 300 PSI (20.5 BAR) pressure still in your Tank
OPERATIONAL DIVE MODES
During Dive Modes, the Wisdom displays a Main (Default) screen of information relevant to that Dive Mode
and Alternate screens that display secondary information.
NO DECO MAIN DISPLAY (DEFAULT) (Fig. 65)
Displayed from left to right and top to bottom are -
• Max Depth and graphics MAXIMUM and FEET (or METERS)
• Bottom Time (hr:min) and graphic DIVE TIME
• Mode icon NITROX or AIR
• Current Depth and graphic FEET (or METERS)
• Dive Time Remaining (min) (NDC, ATR, or OTR) and graphic SAFE MINUTES
• Cylinder Pressure and graphic PSI (or BAR)
• Bar Graphs - NiBG, O2BG (if Nitrox), ARI (if ascending)
Depressing the front (Advance) button activates the Backlight.
Pressing/releasing the side (Select) button (< 2 seconds) accesses Alternate Display #1.
Depressing the side (Select) button for 2 seconds, when deeper than 80 feet (24 meters), accesses Deep Stop
Preview screen, if it is set ON.
NO DECO ALTERNATE DISPLAY #1 (Fig. 66)
Displayed from left to right and top to bottom are -
• Temperature and graphic F (or C)
• Time of Day (hr:min) and graphic TIME
• Mode icon NITROX or AIR
• Current Depth and graphic FEET (or METERS)
• ATR (or NDC) (min) and graphic SAFE MINUTES, and Tank icon if ATR
• Cylinder Pressure and graphic PSI (or BAR)
• Bar Graphs - NiBG, O2BG (if Nitrox), ARI (if ascending)
Depressing the front (Advance) button activates the Backlight.
Pressing/releasing the side (Select) button accesses Alternate Display #2 (if Nitrox).
The display reverts to the Main after 5 seconds if S is not pressed.
NO DECO ALTERNATE DISPLAY #2 (Fig. 67)
Displayed from left to right and top to bottom are -
• Current PO2 level (ATA) and alpha graphic PO2
• Mode icon NITROX or AIR
• Current Depth and graphic FEET (or METERS)
• FO2 Set Point (ATA) and graphic FO2%
• Cylinder Pressure and graphic PSI (or BAR)
• Bar Graphs - NiBG, O2BG (if Nitrox), ARI (if ascending)
Depressing the front (Advance) button activates the Backlight.
Pressing/releasing the side (Select) button reverts to the Main.
The display reverts to the Main after 5 seconds if S is not pressed.
Fig. 67 - No Deco
Alternate #2
Fig. 66 - No Deco
Alternate #1
Fig. 65 - No Deco
Main