Specification

WELDING CONSUMABLES CATALOG ı 35
STICK (SMAW) ELECTRODE
Shield-Arc
®
70+
Welding Positions
Typical Applications
All
 Relatively high silicon pipe
 API 5L X56 through X70 grade pipe
 Cross country and in-plant pipe
 Light slag for minimal arc interference
 Deep penetration
 Clean, visible weld puddle
 Superior puddle control
Conformances
AWS E8010-G • Low Alloy, Cellulosic, Pipe
Key Features
AWS A5.5/A5.5M: 2006
ASME SFA-A5.5:
ABS:
CWB/CSA W48-06:
TUV:
E8010-G, E8010-P1*
E8010-G, E8010-P1*
E8010-G
E5510-G
DIN EN ISO 2560-A:E
DIAMETERS / PACKAGING
Diameter Length 50 lb (22.7 kg)
Easy Open Can
in (mm) in (mm)
1/8
5/32
3/16
(3.2)
(4.0)
(4.8)
14 (350)
14 (350)
14 (350)
ED012841
ED012849
ED012845
* This product is classified as an E8010-G; however, it also meets the requirements of an E8010-P1.
TYPICAL OPERATING PROCEDURES
Current (Amps)
Polarity 1/8 in (3.2 mm) 5/32 in (4.0 mm) 3/16 in (4.8 mm)
DC+ 75-130 90-185 140-225
MECHANICAL PROPERTIES
(1)
– As Required per AWS A5.5/A5.5M: 2006
Yield Strength
(2)
Tensile Strength Elongation
Charpy V-Notch
J (ft•lbf)
MPa (ksi) MPa (ksi) % @ -29°C (-20°F) @ -46°C (-50°F)
Requirements - AWS E8010-G 460 (67) min. 550 (80) min. 19 min. Not Specified Not Specified
Typical Results
(3)
- As-Welded 460-620 (67-90) 585-690 (85-100) 19-31 37-81 (27-60) 26-64 (19-47)
DEPOSIT COMPOSITION
(1)
%C %Mn %Si %P %S
Requirements
(4)
- AWS E8010-G Not Specified 1.00 min. 0.80 min. 0.03 max. 0.03 max.
Typical Results
(3)
0.13-0.17 0.60-1.20 0.05-0.30 ) 0.01 ) 0.01
%Ni %Cr %Mo %V
Requirements
(4)
- AWS E8010-G 0.50 min. 0.30 min. 0.20 min. 0.10 min.
Typical Results
(3)
0.75-0.97 0.01-0.20 0.05-0.15 0.02-0.04
(1)
Typical all weld metal.
(2)
Measured with 0.2% offset.
(3)
See test results disclaimer below.
(4)
In order to meet the alloy requirements of the “G” designation, the undiluted weld metal shall have the minimum of at least one of the elements listed.