Instruction manual

Safety Instructions
IX
RF-20A/20Axs
 Precautions for Instrument Inspection, Maintenance, Adjustment and Care
!WARNING
• Unplug the instrument before inspection, maintenance,
or parts replacement.
Failure to do so may cause electrical shock or short-circuit
accidents to occur.
• Never remove the main cover.
This may cause injury or malfunction of the instrument.
The main cover does not need to be removed for routine
maintenance, inspection and adjustment. Have your Shimadzu
representative perform any repairs requiring removal of the main
cover.
• Replace fuses only with fuses of the proper type and
capacity.
Any other fuses could cause a fire.
• If the power cord plug gets dusty, remove the plug from
the power outlet and wipe away the dust with a dry cloth.
If dust is allowed to accumulate, fire could result.
• Replacement parts must be of the specifications given in
"1.3 Component Parts" or "9.3 Maintenance Parts".
Use of any other parts may result in instrument damage and
malfunction.
• Do not allow spilled water to remain on the instrument
surface, and do not use alcohol or thinner-type solvents
to clean the surfaces.
These can cause rusting and discoloration.
• Dispose of waste liquid properly and in accordance with
the instruction by your administrative department.