Instruction manual

5. Application Operation
5-16
RF-20A/20Axs
5.2.3 Parameter Settings Group
This is the group that relates to parameter settings.
 Setting the Wavelength for Channel 1 [ch1]
Set the excitation wavelength and emission wavelength
for channel 1.
^ "4.1.2 Setting the Measurement Wavelengths"
P. 4 - 3
"4.2.2 Setting the Measurement Wavelengths"
P.4-22
Enter each wavelength with the numeric keys, then
press .
NOTE
When [2] (dual wavelength mode) has been set for
[λ MODE], the setting cannot be made 0 nm.
 Setting the Wavelength for Channel 2 [ch2] (Only in the Dual Wavelength Mode)
Set the excitation wavelength and emission wavelength
for channel 2.
^ "4.2.2 Setting the Measurement Wavelengths"
P.4-22
Enter each wavelength with the numeric keys, then
press .
PARAMETER
Enter to Select
ch1 EX350 EM450
Input 0,200-900
Wavelength Setting Range (Units: nm)
EX (excitation wavelength) 0, 200 to 900
EM (emission wavelength) 0, 200 to 900
ch2 EX350 EM450
Input 200-900
Wavelength Setting Range (Units: nm)
EX (excitation wavelength) 200 to 900
EM (emission wavelength) 200 to 900