Instruction manual

5.2 Setting the Auxiliary Functions
5-17
RF-20A/20Axs
5
 Setting the Measurement Mode [λ MODE]
Set the measurement mode as single wavelength mode
or dual wavelength mode
^ "4.1 Measuring in the Single Wavelength Mode"
P. 4 - 2
"4.2 Measuring in the Dual Wavelength Mode"
P.4-21
Enter the measurement mode with the numeric keys,
then press .
 Setting the Lamp ON/OFF Status [LAMP]
Set the ON/OFF status of the lamp.
Enter the set value from the numeric keys and press
.
NOTE
When the Xenon lamp is turned ON this instrument is
initialized.
On completion of initialization the set values are re-set to
their status before the lamp was turned ON.
 Setting the Flow Cell Temperature [CELL TEMP] (RF-20Axs Only)
Set the temperature of the flow cell.
^ "4.1.9 Setting the Flow Cell Temperature (RF-
20Axs Only)" P.4-19
^ "4.2.9 Setting the Flow Cell Temperature (RF-
20Axs Only)" P.4-40
Enter the set value from the numeric keys and press
.
MOD E1
1:Single 2:Dual
Set Value Measurement Mode
1 Single wavelength mode
2 Dual wavelength mode
LAMP
0:OFF 1:ON
Set Value Setting
0OFF
1ON
CELL TEMP 0
0:OFF, 4 - 40
°C
Set Value Setting
0 The temperature is not adjusted.
4 to 40 °C
The temperature is adjusted to the set
value.