Instruction manual

5.2 Setting the Auxiliary Functions
5-23
RF-20A/20Axs
5
 Setting the Output Range for Analog Output Connector 2 [ANA2 REC RANGE]
Set the output range for analog output connector 2.
Before making this setting, set the output mode of
analog output connector 2 to RECORDER. If it is set to
INTEGRATOR, this setting will not take effect.
^ "4.1.4 Setting the Output Ranges" P.4-7
"Setting the Output Mode for Analog Output
Connector 2 [ANALOG2 MODE]" P.5-21
Enter the set value from the numeric keys and press
.
* When a baseline offset value, [BL OFS ANA1] or [BL OFS ANA2], is
set, the corresponding set voltage is output.
ANA2 REC RANG 1
Input 0 - 9
Set Value Output Range
0 Short (output is 0 mV) *
1 × 1
2 × 1/2
3 × 1/4
4 × 1/8
5 × 1/16
6 × 1/32
7 × 1/64
8 × 1/128
9 × 1/256