Manualshelf

Instruction manual

ManualsBrandsShimadzu ManualsDomestic AppliancesBL3200S
121122123124125126127128129130
5. Application Operation
5-24
RF-20A/20Axs
Setting the Baseline Offset Value for Analog Output Connector 1 [BL OFS ANA1]
Set the baseline offset value for analog output connector
1. Before making this setting, set the output mode and
output range for analog output connector 1 and connect
the recorder or Chromatopac to analog output connector
1.
^ "4.1.5 Setting Baseline Offset Values" P.4-11
"Setting the Output Mode for Analog Output
Connector 1 [ANALOG1 MODE]" P.5-20
"Setting the Output Range for Analog Output
Connector 1 [ANA1 REC RANGE]" P.5-22
Enter the set value from the numeric keys and press
.
On pressing after making this setting, the
baseline is set to the value set here.
Setting the Baseline Offset Value for Analog Output Connector 2 [BL OFS ANA2]
Set the baseline offset value for analog output connector
2. Before making this setting, set the output mode and
output range for analog output connector 2 and connect
the recorder or Chromatopac to analog output connector
2.
^ "4.1.5 Setting Baseline Offset Values" P.4-11
"Setting the Output Mode for Analog Output
Connector 2 [ANALOG2 MODE]" P.5-21
"Setting the Output Range for Analog Output
Connector 2 [ANA2 REC RANGE]" P.5-23
Enter the set value from the numeric keys and press
.
On pressing after making this setting, the
baseline is set to the value set here.
BL OFS ANA1 0
Input -2 - 250mV
Setting Range (Units: mV)
−2 to 250 (default value: 0)
BL OFS ANA2 0
Input -2 - 250mV
Setting Range (Units: mV)
−2 to 250 (default value: 0)