Instruction manual

5. Application Operation
5-28
RF-20A/20Axs
 Setting the Scan Speed [SCAN SPEED]
Set the scan speed for spectrum scanning.
Enter the set value from the numeric keys and press
.
 Setting the Speed at Which Spectrum Data Is Output [PLOT SPD]
Set the speed at which the spectrum data obtained in
spectrum scanning is output.
Select the set value with the numeric keys, then press
.
 Outputting Spectrum Data [SPC PLOT]
Output spectrum data.
1
Press with the screen on the right
displayed.
2
During output, the screen to the right is displayed.
∗ To stop output, press again while the
screen to the right is displayed.
SCAN SPEED 2
Input 1 - 4
Set Value Scan Speed
1 SUPER (3000 nm/minute)
2 FAST (600 nm/minute)
3 MEDIUM (120 nm/minute)
4 SLOW (24 nm/minute)
PLOT SPD 1
1:1 2:5 3:10nm/s
Set Value Output Speed (Units: nm/sec)
11
25
310
SPC PLOT
Enter to Plot
SPC PLOT
PLOTTING