Instruction manual

5. Application Operation
5-46
RF-20A/20Axs
 Selecting the Operation Mode [OP MODE]
Set the operation mode of the instrument according to
the system controller that it is connected to.
Enter the set value from the numeric keys and press
.
The default value is [0].
^ "5.7.3 Notes on Operation" P.5-77
 Initializing Parameters [INITIALIZE PARAM]
Initialize the set parameters, and the time programs.
Press .
The set parameters are returned to their default values
and the time programs are deleted. A record is left in the
operation log.
OP MODE 0
0:20A 1:XL
Set Value System Controller
0
Instrument controlled from a CBM-20A/
20Alite.
1
Instrument controlled from an SCL-10Avp.
(The instrument goes into the RF-10A
XL
compatibility mode and operates as an
RF-10A
XL.)
INITIALIZE PARAM
Enter to Init