Instruction manual

5. Application Operation
5-50
RF-20A/20Axs
 Showing the Serial Number [SERIAL NUMBER]
Shows the serial number of the CBM that controls the
instrument.
With the [CBM PARAMETER] title screen displayed,
repeatedly press until the screen to the right
appears.
The serial number of the CBM-20A/20Alite is shown on
the second line.
 Showing the Software Version Number [S/W ID]
Shows the name (the same as the model name) and
version of the software of the CBM that controls the
instrument.
With the [CBM PARAMETER] title screen displayed,
repeatedly press until the screen to the right
appears.
The first line shows the program version number and the
second line shows the name of the system controller.
 Setting the Transmitting Protocol for Communications with the Data Processing Unit
[INTERFACE]
Set the transmitting protocol for communications
between the CBM that controls this instrument and the
data processing unit.
1
With the [CBM PARAMETER] title screen
displayed, repeatedly press until the
screen to the right appears.
The first line shows the current set value.
2
Enter the set value from the numeric keys and
press .
SERIAL NUMBER
L00000000002
S/W ID:*.**
CBM-20A
INTERFACE 1
0:OPT 1:RS 2:ETH
Set Value Transmitting Protocol
0 Connection by optical cable
1
Connection through serial transmission
(RS-232C)
2 Connection by Ethernet