Instruction manual

5.4 Creating Time Programs
5-55
RF-20A/20Axs
5
SCAN Numeric keys
To execute spectrum scanning and
save the data in the specified file
number.
0 to 2 P. 5 - 26
EVNT Numeric keys
To set the operation of the EVENT
output terminal.
0: OFF
1: Sets EVENT1
to ON
2: Sets EVENT2
to ON
12: Sets EVENT1
and EVENT2
to ON
0: OFF
1: Sets EVENT1
to ON
P. 5 -2 5
LOOP Numeric keys
To set the number of repetitions of
the time program (only when the
instrument is used in isolation).
0 to 255 times ([0] indicates 256 times) P. 5 -5 9
STOP key To terminate the time program. − P.5 - 6 0
LAMP Numeric keys To turn the lamp off. 0: OFF P. 5 - 1 7
CELT Numeric keys
To set the flow cell temperature (RF-
20Axs only).
0: OFF
4 to 40
°C
Cannot be set P. 5 -1 7
∗ The entry in the "Operation" column indicates the following types of operation.
key : Press to set the relevant function.
Numeric keys : Press - to enter a value, then press to confirm the value.
Command Operation Function
Setting Range
Page
RF-20A/20Axs
In RF-10AXL
Compatibility
Mode