Instruction manual

5. Application Operation

5-68

RF-20A/20Axs

5.5.8 Setting Gain

This is the procedure for setting gain. By combining the setting of sensitivity and gain, you can set the

measuring range. The settings for gain are shown below.

The combinations of sensitivity and gain are shown below.

Press repeatedly until [GAIN] in the

parameter settings group is displayed.

Enter the set value from the numeric keys and

press .

This sets the gain.

Set Value Gain

1 × 1

2 × 4

3 × 16

Sensitivity Gain Sensitivity Magnifications

3 (LOW)

1 Approx. × 1

2 Approx. × 4

3 Approx. × 16

2 (MED)

1 Approx. × 32

2 Approx. × 128

3 Approx. × 512

1 (HI)

1 Approx. × 1024

2 Approx. × 4096

3 Approx. × 16384

GAIN 2

1:x1 2:x4 3:x16