Instruction manual

8.3 Disassembling the Flow Cell Unit and Cleaning/Replacing Each Part
8-17
RF-20A/20Axs
8
RF-20Axs
Fig. 8.23
8.3.2 Cleaning the Cell
Clean the cell removed in "8.3.1 Disassembling the Flow Cell Unit" P.8-14.
 Cleaning the Cell
1
Clean the cell by immersing it in 2-propanol and
wiping its surfaces with clean guaze or wiper cloth.
∗ If the dirt cannot be removed, replace the cell
with a new one.
2
Moisten a piece of clean gauze or wiper cloth with
2-propanol and use it to wipe off the dirt inside the
flow housing.
Cell housing
Cell gasket
Cell
Spacer
Rear plate
Screws