Instruction manual
8.3 Disassembling the Flow Cell Unit and Cleaning/Replacing Each Part
8-19
RF-20A/20Axs
8
8.3.3 Cleaning the Emission Lens
Parts used
For the RF-20Axs:
Remove the emission lens from the lens holder removed
in "8.3.1 Disassembling the Flow Cell Unit" P.8-14, then
clean the lens.
1
Using an implement with a fine point, such as a
toothpick, remove the O-ring from the lens holder.
Fig. 8.27
2
Remove the emission lens from the lens holder.
Fig. 8.28
!CAUTION
• Do not subject the emission lens to ultrasonic
cleaning.
This could damage the emission lens.
Part Name Part Type Part No.
Emission lens Replacement part 228-48700
O-ring
Lens holder
O-ring
Emission lens
Lens holder