Instruction manual

8.4 Inspecting/Replacing the Xenon Lamp
8-33
RF-20A/20Axs
8
8
Unscrew the knurled nut at the top of the Xenon
lamp and remove the cord terminal from the
positive (+) terminal of the Xenon lamp.
Fig. 8.47
9
Remove the two hexagon spacers that secure the
Xenon lamp to the instrument with the wrench
provided as an accessory.
10
Remove the Xenon lamp from the lamp unit
together with its holder.
∗ The Xenon lamp doesn't come apart from the
holder.
Fig. 8.48
11
Fit the Xenon lamp in the lamp unit.
∗ The Xenon lamp comes with a lamp holder.
Fit the lamp by aligning the two holes in the
lamp holder with the positioning pins in the lamp
unit.
Fig. 8.49
Cord terminal
Knurled nut
Positive (+)
terminal of the
Xenon lamp
!CAUTION
• Be sure to unscrew the knurled nut by hand.
If a tool like a wrench is used, there is a risk of
breaking the Xenon lamp, causing leakage of the
gas inside it.
Xenon
lamp
Lamp
holder
Hexagon
spacers
Lamp unit
Hexagon
spacers
Positioning pins
Lamp
holder
Xenon
lamp
Lamp
unit