Instruction manual

9.1 Installation
9-7
RF-20A/20Axs
9
 Connection to Power Outlet
Fig. 9.6
1
Insert the connector end of the power cord into the
power cord connector at the back of the
instrument.
2
Insert the plug end of the power cord into the
power supply outlet.
Fig. 9.7
 Grounding
!WARNING
• Handle the power cord with care.
Observe the following precautions to avoid cord
damage, fire, electric shock or instrument failure.
• Do not place heavy objects on the cord.
• Keep hot items away from the cord.
• Do not modify the cord.
• Do not bend the cord excessively or pull on it.
• To unplug the instrument, pull the plug itself,
NOT the cord.
If the cord is damaged, contact your Shimadzu
representative.
Power cord connector
Connector end
Power cord
Plug end
To power outlet
!CAUTION
• Before plugging in the instrument, make sure
that the power switch is OFF.
!WARNING
The three-line type power cable provided as an
accessory includes the grounding wire.
Be sure to ground through this cable in order to
prevent electrical shock and to ensure stable
operation of the instrument.