Instruction manual

9. Technical Information
9-32
RF-20A/20Axs
 Connecting to a Recorder
Fig. 9.47
1
Connect the signal cable provided as an accessory to analog output connector 1 or 2.
2
Connect the other end of the signal cable to the terminals at the recorder.
3
Plug in the instrument, and turn the power switch ON.
4
Set, at the recorder, the output mode of the analog output connector to which the connection has been
made.
^ "Setting the Output Mode for Analog Output Connector 1 [ANALOG1 MODE]" P.5-20
"Setting the Output Mode for Analog Output Connector 2 [ANALOG2 MODE]" P.5-21
5
Set the output range of the analog output connector to which the connection has been made.
^ "Setting the Output Range for Analog Output Connector 1 [ANA1 REC RANGE]" P.5-22
"Setting the Output Range for Analog Output Connector 2 [ANA2 REC RANGE]" P.5-23
Black (−)
White (+)
Signal cable
Analog output connector 2
Recorder
Analog output connector 1