Instruction manual

9.1 Installation
9-35
RF-20A/20Axs
9
6
Hold the lamp unit's handle and pull the unit out of
the instrument as shown in the figure to the right.
Fig. 9.51
7
Unscrew the screw on the top of the lamp unit and
pull the PTFE cover toward the front.
Fig. 9.52
8
Remove the lamp unit's two hexagon spacers with
the wrench provided as an accessory.
Fig. 9.53
Lamp unit
Handle
Screw
Lamp unit
PTFE
cover
Hexagon
spacers
Lamp unit