Instruction manual

1.4 Optional Parts
1-5
RF-20A/20Axs
1
1.4 Optional Parts
 Optional Cells
Changing the standard cell to the following optional cells enables use as a detector for a variety of
applications including semi-micro LC, metal-free LC, FAST LC and so on.
Part Part No. Remark
Flow cell
(RF-20A standard flow cell)
228-45856-92
This is the standard cell for the RF-20A.
Cell capacity: 12 μL
Wetting part materials: SUS316L, PTFE, quartz
Inlet tube ID: 0.25 mm
Volume from the end of the inlet tube to the center of the
cell: 15 μL
Outlet tube ID: 0.25 mm
Volume from the center of the cell to the end of the outlet
tube: 16 μL
Flow cell
(RF-20Axs standard flow cell)
228-45856-91
This is the standard cell for the RF-20Axs.
Cell capacity: 12 μL
Wetting part materials: SUS316L, PTFE, quartz
Compatible with the temperature control function (when
installed on an RF-20Axs)
Inlet tube ID: 0.25 mm
Volume from the end of the inlet tube to the center of the
cell: 45 μL
Outlet tube ID: 0.25 mm
Volume from the center of the cell to the end of the outlet
tube: 21 μL
Temperature controlled flow cell for
semi-micro LC
228-51950-91
Cell capacity: 3 μL
Wetting part materials: SUS316L, PTFE, quartz
Can be used with RF-20A/20Axs
Compatible with the temperature control function (when
installed on an RF-20Axs)
Inlet tube ID: 0.13 mm
Volume from the end of the inlet tube to the center of the
cell: 17 μL
Outlet tube ID: 0.13 mm
Volume from the center of the cell to the end of the outlet
tube: 7 μL
Flow cell for inert LC 228-51951-91
This is a flow cell made of resin, making the material of the
parts in contact with liquids non-metal.
Cell capacity: 12 μL
Wetting part materials: PEEK, PTFE, quartz
Can be used with RF-20A/20Axs
Temperature control function: Not compatible
Inlet tube ID: 0.25 mm
Volume from the end of the inlet tube to the center of the
cell: 16 μL
Outlet tube ID: 0.25 mm
Volume from the center of the cell to the end of the outlet
tube: 16 μL